Paul,
Has Atkins Marine bell hsg been looked at............Starter is in bad position
but it is 5 inches deep and would match up with Tracy's psru + 0.500 plate....
Marine Bell Housing
A cast 6061 T6 Aluminum Bell Housing Designed for Rotary Engines. The standard 6 bolt design allows it to be easily
installed onto most standard marine drives. You will also need to use our marine flywheel and a counterweight with this
bellhousing, as a stock flywheel will not work.
Height : 5"
Radius : 14.4"
Weight : 7 lb / 3.2 kg
Purchase: $320.00
Kelly Troyer
It is sand cast aluminum and very heavy.
Just recess Tracy's box inside a nice light weight high
pressure die cast Mazda light weight bell housing.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.