Subject: Atkins Marine Bell Housing
From: Rotary Engine
Date: 11/7/2011, 11:38 PM
To: AAA Put this in the To box


Paul,
Has Atkins Marine bell hsg been looked at............Starter is in bad
position
but it is 5 inches deep and would match up with Tracy's psru + 0.500
plate....

Marine Bell Housing
A cast 6061 T6 Aluminum Bell Housing Designed for Rotary Engines. The
standard 6 bolt design allows it to be easily installed onto most standard
marine drives. You will also need to use our marine flywheel and a
counterweight with this bellhousing, as a stock flywheel will not work.
Height : 5"
Radius : 14.4"
Weight : 7 lb / 3.2 kg
Purchase: $320.00

Kelly Troyer


It is sand cast aluminum and very heavy.
Just recess Tracy's box inside a nice light weight high
pressure die cast Mazda light weight bell housing.

Paul Lamar


I should be picking up another bell tomorrow at pick your part, and
possibly another 89 13b depending on how lucky I am with it's condition.

Almost every auto trans that is for sale from 86 up has a bell on it that
the buyer of the trans will not need as his worn out trans already has one.
So this fact is a good argument to make with someone who is selling their
rx7/8 trans to talk him into selling it to you on the cheap.

Ed Carver




-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.