Hi,
Please find attached pics. I think I'll take the route of using Jeff's plate to minimise complications.
Thanks so far.
Pierre
South Africa
The message is ready to be sent with the following file or link attachments:
Firewall 002
Engine mount reinforcing 001
Engine mount reinforcing 002
Engine mount reinforcing 003
Engine mount reinforcing 004
--
Pierre,
Mark the thrust line position on this drawing.
Do you have a cowl?
What diameter prop do they recommend?
What is the distance from the thrust line to the ground?
-------------------------------------------------
Here is the tail dragger version.
Got any dwgs on the nose gear. Can you scan the planes?
I might be able to work from photos if you take them 90 degrees
from the center line. From the side low down about 20 feet away.
Alao take them from the front from about 20 feet away.
Use a 8 mega pixel camera.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.