Subject: 1991 Turbo II exhaust manifold cracking. Att. Michael Hart]
From: Rotary Engine
Date: 11/13/2011, 8:55 AM
To: AAA Put this in the To box


Hi Michael,

I think I forgot to perform this operation on your exhaust
manifold. Get a die grinder and 1/8" radius all openings to reduce
the cracking tendency. It only takes a few minutes. Even a Dremel tool
will work but it takes a lot longer.

I have never seen one  catastrophically fail but
small cracks are very common and harmless. However they could grow
into larger cracks. The problem is the sharp edges
as Mazda merely machines the casting without radiusing the holes.

The same thing goes for the turbo itself.

Jap Performance in Moorebank, New South Wales
Has at least a dozen used.
(02) 9601 6715
6 Kelso Crs
MoorebankNSW2170



Here is another list that may have some used manifolds.
Rick's Rotary Performance
    Pleasanton, CA
    925-484-2324
    Rx-7 Performance Work and Service.
    Owner: Rick Soderberg


Rotor Sport
    Campbell, CA
    408-374-1330
    Paul Elenga
    Complete Mazda service and repair


Tri-Point Engineering
    Canoga Park, CA
    818-348-5385
    They stock Racing Beat parts, plus an odd assortment of
    spare used parts.  Work on rotaries.


Shum's Auto Clinic
    San Francisco, CA
    1301 Ocean Ave.
    415-584-6655


Rx-7 Specialties
    Calgary
    403-246-6980

  Maztech
Tampa, FL
813-874-0937


Z-Tech
    529 N. Highway 17-92
    Longwood, FL  32750
    407-695-6000
  specialize in RX-7s.



JT Rotary
Honolulu, HI
808-842-7199
The rotary specialty side of KMA Racing.


Jose's Rotary & Muffler
850 Hwy 80 East
Houghton, IA 71037
318.949.3970



Rotary Connection, Inc.
Lexington, KY  40508
606-254-3858
Specializing in all Wankel-type engine work.

Paul Lamar

If it is not possible to find a good used Turbo II manifold
this is easier to fabricate out of 321 SS 3/16" thick than it looks.
I don't think one may find a new Turbo II manifold but I have not
looked.

It is designed to be interchangeable with the stock cast iron manifold
so no changes would be required in the turbo plumbing.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.