Hi Michael,
I think I forgot to perform this operation on your exhaust
manifold. Get a die grinder and 1/8" radius all openings to reduce
the cracking tendency. It only takes a few minutes. Even a Dremel tool
will work but it takes a lot longer.
I have never seen one catastrophically fail but
small cracks are very common and harmless. However they could grow
into larger cracks. The problem is the sharp edges
as Mazda merely machines the casting without radiusing the holes.
The same thing goes for the turbo itself.
Jap Performance in Moorebank, New South Wales
Has at least a dozen used.
(02) 9601 6715
6 Kelso Crs
MoorebankNSW2170
Here is another list that may have some used manifolds.
Rick's Rotary Performance
Pleasanton, CA
925-484-2324
Rx-7 Performance Work and Service.
Owner: Rick Soderberg
Rotor Sport
Campbell, CA
408-374-1330
Paul Elenga
Complete Mazda service and repair
Tri-Point Engineering
Canoga Park, CA
818-348-5385
They stock Racing Beat parts, plus an odd assortment of
spare used parts. Work on rotaries.
Shum's Auto Clinic
San Francisco, CA
1301 Ocean Ave.
415-584-6655
Rx-7 Specialties
Calgary
403-246-6980
Maztech
Tampa, FL
813-874-0937
Z-Tech
529 N. Highway 17-92
Longwood, FL 32750
407-695-6000
specialize in RX-7s.
JT Rotary
Honolulu, HI
808-842-7199
The rotary specialty side of KMA Racing.
Jose's Rotary & Muffler
850 Hwy 80 East
Houghton, IA 71037
318.949.3970
Rotary Connection, Inc.
Lexington, KY 40508
606-254-3858
Specializing in all Wankel-type engine work.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.