This engine runs 60 inches of Hg manifold pressure.
To my knowledge this is the first 6 port exhaust
engine. It uses both the 3rd gen RX7 rotor housing
and the RX8 end housings for an unprecedented
exhaust port area size. It is probably using
low compression rotors from the 3rd gen.

The turbo is covered with
embossed  thin sheet metal Inconel as a heat shield.
Contact Mazdatrix for a price and availability.
Be sitting down :)

Paul Lamar

I bet it isn't close in price to my IO520. How many can you get for 36K?

KA

Probably about four or five :)

Paul Lamar