This engine runs 60 inches of Hg manifold pressure.
 To my knowledge this is the first 6 port exhaust
 engine. It uses both the 3rd gen RX7 rotor housing
 and the RX8 end housings for an unprecedented
 exhaust port area size. It is probably using
 low compression rotors from the 3rd gen.

 The turbo is covered with
 embossed  thin sheet metal Inconel as a heat shield.
 Contact Mazdatrix for a price and availability.
 Be sitting down :)

 Paul Lamar



Paul ---

Engine uses 84-85 GSLSE 13B rotor housings and the stock 10:1 RX8 rotors.

Inconel heat shielding is custom made by www.ATPWrap.com

Dave Lemon

Mazdatrix


Do you have a knock sensor on it Dave?

BTW who makes that 2nd gen 1991 Turbo II SS exhaust manifold?

Paul Lamar