Subject: New light weight belt PSRU design.
From: Rotary Engine
Date: 11/18/2011, 4:56 PM
To: AAA Put this in the To box






Back in the days of Rotomax they asked me to help
them design and  build a belt PSRU in secret. I did some dwgs
for them and here they  are. Rotomax are no longer with us after a
widely publicized crash  because they could not understand or solve the
rotary engine charge  cooled problem.

Attaching a traditional SAE prop flange was the  heaviest part about
my new Rotomax belt drive design.

It just occurred to me our new Ford C9 planetary
PSRU light weight  method of attaching the prop to the shaft
can be used.

I added that to the 3D's at the end. The 3D dwg's say it all.

This method of attaching a prop was invented by Warp Drive to my
knowledge and is now supported by no less than Sensenich,
one of the  oldest prop companies around. Ironically it was
used in the first  Rotomax belt drive design. At the time I did
not recognize the  advantages.

IMHO this is one of the most significant inventions  in
prop hub design since the beginning of aviation. Not  widely
recognized or appreciated yet. It looks too simple
as most good inventions are.

IMHO our planetary driven, large  diameter aluminum prop shaft
PSRU design is in the same category. It  owes it viability
to the invention of the large diameter ceramic  ball bearing.

One new invention leads to another.

Dave Lemon,

This belt drive should be an option for your  proposed new one rotor,
LSA aircraft engine.

Paul  Lamar


Was there a photo or drawing file?
Bill Jepson

Lots  of them. Where you tryiung to get them on your smart phone?

Paul  Lamar

I didn't get any pictures on my computer either. Peter

ops my mistake. Here they are.

Paul Lamar


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.