Subject: New light weight belt PSRU design.
From: Rotary Engine
Date: 11/20/2011, 8:57 AM
To: AAA Put this in the To box


 Back in the days of Rotomax they asked me to help
   them design and build a belt PSRU in secret. I did some dwgs
   for them and here they are. Rotomax are no longer with us after a
   widely publicized crash because they could not understand or solve
 the  rotary engine charge cooled problem.

   Attaching a traditional SAE prop flange was the heaviest part about
   my new Rotomax belt drive design.

   It just occurred to me our new Ford C9 planetary
   PSRU light weight method of attaching the prop to the shaft
   can be used.

   I added that to the 3D's at the end. The 3D dwg's say it all.

   This method of attaching a prop was invented by Warp Drive to my
   knowledge and is now supported by no less than Sensenich,
   one of the oldest prop companies around. Ironically it was
   used in the first Rotomax belt drive design. At the time I did
   not recognize the advantages.

   IMHO this is one of the most significant inventions in
   prop hub design since the beginning of aviation. Not widely
   recognized or appreciated yet. It looks too simple
   as most good inventions are.

   IMHO our planetary driven, large diameter aluminum prop shaft
   PSRU design is in the same category. It owes it viability
   to the invention of the large diameter ceramic ball bearing.

   One new invention leads to another.

   Dave Lemon,

   This belt drive should be an option for your proposed new one
 rotor,  LSA aircraft engine.

   Paul Lamar

 Was there a photo or drawing file?
 Bill Jepson

 Lots of them. Where you trying to get them on your smart phone?

 Paul Lamar


 I did not receive them either. Forwarded an e-mail to a friend and he did not
get the print part.

Dale Davies

Here they are again.

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.