Subject: Re: 12a parts in the northeast
From: Rotary Engine
Date: 11/25/2011, 5:58 PM
To: AAA Put this in the To box

Paul-
Not sure if you use any 12a stuff, or if it's all 13b now, but I saw
this posted:
After collecting rotary parts for a few years in hopes of building a
rotary Miata for NASA's ST class here in the Northeast region, I
accepted the reality that it will never get built. So, as a result I
have an entire back wall of a container with shelves full of mostly 12a
stuff( with a few early 13b 4 port items) ranging from complete running
core engines to many E-shafts,rotors,housings,oil pumps,pans,front
covers,dists., irons(some ported,some not)etc...
It would kill me to see this stuff go to scrap,so I am posting here as I
think the last arena where the 12a is used is either in the Prod. or GT
classes, as the street tuners and drag racers here in the NJ area all
want 13b stuff.
I ideally would like someone local to come and pick through and take the
whole lot as I would prefer not to ship, but email, PM , or call the
shop with questions.......Please pass this on to any friends that could
use these parts.
Thank You,
Dave Deerson


daviddeerson@yahoo.com

732-257-2664

Sorry I couldn't help you last week when you were in San Diego looking
for parts.  I didn't get the message right away, as I didn't have my
phone with me.  Then I didn't know of the rotary place that you were
referring to.  When we were talking on the phone during your drive back,
I was asking if it was a plane or car project.

Hope all is well and you & Robin enjoy your turkey.
Brian

Not to worry. Dave Leonard put it back together with the old
parts except for the cracked exhaust manifold. I had a new one I loaned
him on the promise he would radius the sharp edges. This after going 229 MPH at Reno :)
It is a 1991 13B Turbo II engine.

Paul Lamar