Subject: Belt Chain PSRU
From: Rotary Engine
Date: 11/26/2011, 2:14 AM
To: AAA Put this in the To box



  Found this Chain Drive used with a Mazda 13B Rotary in a Jet Ski, is
their
  a limit on the RPM Chain Drive and Belt Drives can run at, does not look
  like much gear reduction here.

  http://www.youtube.com/watch?v=3aSBItXzMXg&feature=related

  I noted that in another email it was mentioned that the Maverick Flying
Car
  was FAA approved LSA, they are using a Subaru Engine, I was not aware
that
  Subaru engines where FAA Certified, the more I read and see the more
  confused I am with this Light Sport Aircraft category?  Why wouldn't a
  Mazda Engine be Certified if someone used one in a Special Light Sport
  Aircraft Airworthiness Application...

  http://mavericklsa.com/certification.html

  GFCurtis Jr.


  --  Hi I believe that it is registered as an experimental that meets LS
requirements and can be flown by a LS pilot.  I do not think it is a LSA
certified engine, certainly not part 33 FAA certified.


Murry I Rozansky

Hi Paul, will you be at SZP Sat.?  Mon.? Tues?  for a visit.

  Murry I Rozansky


How about tomorrow Sat at noon?
Hangar 6 Vicki Cruise taxii way on the SW end.
2 story gray hangars.

Paul



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.