Subject: Mazda rotary engine fuel burn
From: Rotary Engine
Date: 11/27/2011, 2:07 AM
To: AAA Put this in the To box


Sir:

I am nearing retirement and am considering building an aircraft as my
retirement project. I recently have learned of the Mazda rotary engine and
was wondering where I could buy one already assembled, and If they can now
be used with a constant speed prop. What would the consumption rate be for a
2 rotor and a 3 rotor engine at cruise. So far I like what I have read but
most of it is over my head.


I'm looking forward to your reply. Until then...

Allan Krausz

It is very much a do it yourself aircraft engine.
You buy an engine from a junkyard or from the Internet
and build an intake and exhaust  manifold.
Some people are selling useful parts like gear boxes,
manifold parts and EFI's.

The fuel burn is .47 pounds of fuel for every HP generated
for one hour. Say you are using 150 HP to cruise.
The fuel burn would be .47 times 150 HP or 70.5 pounds.
Fuel weighs 6.25 pounds per gallon so that is 11.3 gallons
per hour. If you have a clean airplane and can go
200 MPH on 150- HP that works out to 18 miles per gallon.

This is roughly the same as a Lycoming.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.