Subject: Dyno donation to the Whiteman EAA chapter
From: Rotary Engine
Date: 12/27/2011, 12:13 AM
To: AAA Put this in the To box


   Ed and Murry:

   What do you guys think of donating the dyno to the
   Whiteman chapter. Will work with an aircraft engine
   as well.

   I will be available to help get any engine,
   be it rotary or non rotary, up and running on it.

   Trailer not included.

   Paul Lamar



 I need to contact someone who knows more about the available space in the
 EAA hanger. It's quite packed at the time, and there is discussion of
 adding a second floor in the hanger. Chapter 40 has a forum I will use to
 find out.

 It looks to me like the dyno frame could be made to fold up, or be hung on
 a wall. I was under the impression from your last message on this subject,
 you were implying I should build one. Looks easy. Kind of thing I could
 knock out in a day.

 Ed Carver


 OK Ed Thanks.

 Paul Lamar
 -
    Hi Paul, we are interested. As Ed said , we need to make sure we have
room for it.-


Murry I Rozansky

The shaft and pillow block bearings plus the material is worth a lot.
Plus it is all welded and painted. You will need a couple of 8 foot 4" by 4"
to act as a skid and the balance the weight of the over hung firewall
forward. The size at that point would be 8 feet long 4 feet wide
and 4 feet high. Harbor freight sells trailers for $200.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.