Ed and Murry:

  What do you guys think of donating the dyno to the
  Whiteman chapter. Will work with an aircraft engine
  as well.

  I will be available to help get any engine,
  be it rotary or non rotary, up and running on it.

  Trailer not included.

  Paul Lamar



 I need to contact someone who knows more about the available space in the
 EAA hanger. It's quite packed at the time, and there is discussion of
 adding a second floor in the hanger. Chapter 40 has a forum I will use to
 find out.

 It looks to me like the dyno frame could be made to fold up, or be hung on
 a wall. I was under the impression from your last message on this subject,
 you were implying I should build one. Looks easy. Kind of thing I could
 knock out in a day.

 Ed Carver


 OK Ed Thanks.

 Paul Lamar
 -
   Hi Paul, we are interested. As Ed said , we need to make sure we have
room for it.-


Murry I Rozansky

The shaft and pillow block bearings plus the material is worth a lot.
Plus it is all welded and painted. You will need a couple of 8 foot 4" by
4"
to act as a skid and the balance the weight of the over hung firewall
forward. The size at that point would be 8 feet long 4 feet wide
and 4 feet high. Harbor freight sells trailers for $200.


Paul Lamar



I just left a message on the chapter 40 forum. Hopefully we'll get a reply
soon.
I have 4x4 material. I also have wheels for trailering it on the airport.
Easy to stop by pick your part to get a rear axel assm from a front wheel
drive car to make a trailer.

Ed Carver