Did you build a prototype to test your concept ?
Guido Bartolomei
Not yet. My guess is the MPG running on the AIXRO alone will
be .73/.52 X 25 will be about 35 MPG. Converting the AIXRO to an oil
cooled rotor and EFI and the RX8 MPG could jump to 38.8 MPG.
Going the full turbo compound route on the AIXRO and getting
the BSFC down to .4 or below the RX8 MPG would jump to
.73/.4 X 25 or 46 MPG at a steady 65 MPH.
The cost of testing this is not beyond the means of an individual.
Paul Lamar
Paul,
Thanks for your answer. I cannot afford myself building a proto
alone to test your concept, but I would be happy in putting money
with some others to allow you doing that.
With no return whatsoever for me. HGB.
How much ? I'm cinvinced good ideas --and yours is one-- always find out financing.
HGB.
If we are talking just the turbo compound part dyno time is $650 a day at Mazda tricks
ands maybe more at Racing Beat.
Here is what a simple test set up would look like.
We would also need to fabricate a 321 SS diffuser and exhaust duct for the turbine.
Then obtain a surplus R3350 blow down turbine.
Then machine an adapter to connect the engine with turbine to the dyno.
The purpose of this initial test program to demonstrate some power recovered from the exhaust.
It would be far from optimum however. My wild guess is somewhere between $20K and $50K.
If that worked then the next step is acquire a turbine optimized for that
simple configuration from Barber Nichols or some similar company.
Assume another $50,000 to $100,000.
For the AIXRO version everything but the cost would be scaled down.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.