Subject: Dyno donation to the Whiteman EAA chapter
From: Rotary Engine
Date: 12/28/2011, 4:21 PM
To: AAA Put this in the To box


    Ed and Murry:

    What do you guys think of donating the dyno to the
    Whiteman chapter. Will work with an aircraft engine
    as well.

    I will be available to help get any engine,
    be it rotary or non rotary, up and running on it.

    Trailer not included.

    Paul Lamar



   I need to contact someone who knows more about the available space in
the
   EAA hanger. It's quite packed at the time, and there is discussion of
   adding a second floor in the hanger. Chapter 40 has a forum I will use
to
   find out.

   It looks to me like the dyno frame could be made to fold up, or be
hung on
   a wall. I was under the impression from your last message on this
subject,
   you were implying I should build one. Looks easy. Kind of thing I could
   knock out in a day.

   Ed Carver


   OK Ed Thanks.

   Paul Lamar
   -
     Hi Paul, we are interested. As Ed said , we need to make sure we have
  room for it.-


  Murry I Rozansky

  The shaft and pillow block bearings plus the material is worth a lot.
  Plus it is all welded and painted. You will need a couple of 8 foot 4"
by
  4"
  to act as a skid and the balance the weight of the over hung firewall
  forward. The size at that point would be 8 feet long 4 feet wide
  and 4 feet high. Harbor freight sells trailers for $200.


  Paul Lamar



I just left a message on the chapter 40 forum. Hopefully we'll get a reply
soon.
I have 4x4 material. I also have wheels for trailering it on the airport.
Easy to stop by pick your part to get a rear axel assm from a front wheel
drive car to make a trailer.

Ed Carver

Hi Ed, I think it will fit in the back of a pick up, so a trailer might be
useul later, but is not needed  now.  I'll try to get an OK from Charlie
and Ferd.


Murry I Rozansky


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.