Paul,

Did you measure the MAP for your p-port Renesis during the dyno runs?
 Do you recall the readings you got, particularly at idle speeds?  I'm
questioning the readings I am getting at idle speeds (approx. 2k rpm)
... around 17".  I measure MAP at the old oil injection ports.  The
three are teed together.

Mark S.

Sorry to not get back to you sooner Mark. We had severe email
problems with earthlink servers.

I don't recall what those numbers were at 2K RPM. I don't
think we tested at that RPM. That sounds real high for only
2000 RPM. What mixture are you  using at that RPM?
Does the engine idle smoothly at that RPM?

Is that a steam gage or electronic pressure sensor reading?

Paul Lamar