Subject: more replies from bearing suppliers
From: "rotaryeng@earthlink.net" <rotaryeng@earthlink.net>
Date: 1/6/2012, 4:24 PM
To: AAAA Put this in the To box



   Hi Paul, I will happily make a purchase of the bearing type we want.
   What I need to verify is the bearing type. The bearing type I requested
   a quote on is to the best of my knowledge the appropriate type for our
   purposes.

   Following your prompt in suggesting we use a deep groove conrad type
   bearing assembly, I compared the various constructs available form
   several manufacturers using their own comparison charts. So it appears
   to me that the deep groove open radial bearing is the best option for
   our needs. The static, dynamic, and thrust loads appear to be well
   within our tolerances so long as we can hold the bearing securely in
   place.

   Please let me know if you believe a different design is better suited
   for the task. I am holding off the salesman for a day or two before
   placing an order, at which point, I will likely be waiting a good 6
   weeks for delivery.


   Here are the general specs being offered for the preferred size 6821
   common bearing 105x130x13mm

       Hybrid ceramic Open cage deep groove radial for handling
       longitudinal loads fore and aft.
       440c stainless rings rockwell C 60 +-2. good to 350F
       PTFE cage is the most common for hybrid designs.
       Ball number ranges from 27 for 1/4 balls, to 34 for the smaller
   balls

       Only one company has given me pricing. $58 each unit but they may
       demand 12 units minimum and have requested we send them $220 extra
       for courier delivery.

       The company is:

       Luoyang rockwellprecision bearing Co., LTD

       TAX:+86-15036573663 <tel:%2B86-15036573663> <tel:%2B86-15036573663>


       FAX:+379-64152695

       Email: ber345@live.cn <mailto:ber345@live.cn>

       Web Site: www.rwbearing.com <http://www.rwbearing.com>


   Ed Carver


   I called VXB and the part number is the same as Shanghai Lilly
   but it is not Hybrid ceramic. Forget VXB.
   We will have to buy direct from shanghai lilly.

   http://en.lily-bearing.com/

   http://en.lily-bearing.com/__about.htm
   <http://en.lily-bearing.com/about.htm>

   I'll be going over there in Feb so hold off.

   Henry can probably find a distributor in Hong Kong and we will
   order them ahead of time and I will bring them back in my
   carry on.


   Paul Lamar



I've been in contact with Lily, see below. For two they want $550+
 Ed

*/////Dear Ed Carver*

*Thank you for choosing us.*

*According to our quotation on January 5, we request of the minimum
order is 5pcs.*

* if you reduce the quantity to 2pcs, our price will be increased. Below
are new quotation,check pls.*

*2pcs   US$250/pc
Freight:US$150
Total:US$550
Delivery time:15days
If you have any question, please feel free to contact us.*
**
*
*
Vicky cheng
Tel:(86)21-51696239
Fax:(86)21-51010235
Shanghai Lily Bearing Manufacturing Co.,Ltd.
30 Lane 1588 South Hong Mei Rd.Shanghai,
China 200237.
http://en.lily-bearing.com/



2012/1/6 Ed Carver <edc153@yahoo.com <mailto:edc153@yahoo.com>>
Yes Vicky, and thank you for your response.
We have been quoted 12 similar units for about $900 from another vendor
including freight. It is the minimum required purchase amount that is
delaying our carrying through with an order. In other words, I would buy
two of your bearings for the stated unit price.
We are creating a prototype using these bearings. If the bearings fail
on the test stand, then it makes the rest of the order worthless to us.
So we are reluctant to take the risk in buying more than necessary at
this point.

 I will gladly purchase two units from you.

Thank you!
Ed Carver


------------------------------------------------------------------------
*From:* Vicky Cheng <vicky@lily-bearing.com <mailto:vicky@lily-bearing.com>>
*To:* Ed Carver <edc153@yahoo.com <mailto:edc153@yahoo.com>>
*Sent:* Thursday, January 5, 2012 10:41 PM

*Subject:* Re: Thin section bearings

*Dear **Ed Carver*

*Did you receive the quotation that I've sent u? *
*What do you think of our price?Would you consider buying from us?*
*We look forward to cooperation with you. so waiting for your reply.*
*thank you.*


Vicky cheng
Tel:(86)21-51696239
Fax:(86)21-51010235
Shanghai Lily Bearing Manufacturing Co.,Ltd.
30 Lane 1588 South Hong Mei Rd.Shanghai,
China 200237.
http://en.lily-bearing.com/



2012/1/5 Vicky Cheng <vicky@lily-bearing.com
<mailto:vicky@lily-bearing.com>>
*Dear **Ed Carver*
*
*
*According to your requirement, offer as follows,check pls.*
*
Quotation :
5pcs  US$180/pc
Freight:US$200
Total:US$1100
Delivery time:10days
If you have any question, please feel free to contact us.
Referring to the detailed introduction, pls browse our website:
http://en.lily-bearing.com/cp.htm
*


Vicky cheng
Tel:(86)21-51696239
Fax:(86)21-51010235
Shanghai Lily Bearing Manufacturing Co.,Ltd.
30 Lane 1588 South Hong Mei Rd.Shanghai,
China 200237.
http://en.lily-bearing.com/



2012/1/4 Ed Carver <edc153@yahoo.com <mailto:edc153@yahoo.com>>
Thanks for replying

We are building a prototype driveshaft to replace an aging design. So we
want to order a minimal amount at first. Then after sorting out any
problems in the design, we will need many more. So to start we really
only need 2 bearing units. Let us know if you have a minimum for
ordering from your company, and also if the price changes significantly
for larger quantities.

Please also include shipping quote for delivery to:
Los Angeles CA 91352

Our ideal size is the common size for part number 6821 or similar
105x130x13mm. Please provide full specifications when replying, such as
steel type used, ball size and number. Load and speed limits, etc. The
specifications can vary greatly between different bearing models, so
please be specific in you quote.

Hope to hear from you soon.
Ed Carver

------------------------------------------------------------------------
*From:* Vicky Cheng <vicky@lily-bearing.com <mailto:vicky@lily-bearing.com>>
*To:* edc153@yahoo.com <mailto:edc153@yahoo.com>
*Sent:* Wednesday, January 4, 2012 12:35 AM
*Subject:* Re: Thin section bearings

*Dear **Ed Carver*
*
*
*Thank you for your inquiry.*
*We could provide the **thin section **bearings you needed.*
*Pls kindly tell me the quantity you need.
I will provide the best price for you.*
*
*
*If you have any question, please feel free to contact us.*
*Referring to the detailed introduction, pls browse our website:
http://en.lily-bearing.com/cp.htm*


Vicky cheng
Tel:(86)21-51696239
Fax:(86)21-51010235
Shanghai Lily Bearing Manufacturing Co.,Ltd.
30 Lane 1588 South Hong Mei Rd.Shanghai,
China 200237.
http://en.lily-bearing.com/



2012/1/3 Cheng <lilybearing@lily-bearing.com
<mailto:lilybearing@lily-bearing.com>>


---------- Forwarded message ----------
From: *Ed Carver* <edc153@yahoo.com <mailto:edc153@yahoo.com>>
Date: 2012/1/3
Subject: Thin section bearings
To: "lilybearing@lily-bearing.com <mailto:lilybearing@lily-bearing.com>"
<lilybearing@lily-bearing.com <mailto:lilybearing@lily-bearing.com>>


Hello, I need thin section bearings with these specifications:
Radial deep groove open or sealed
Hybrid ceramic
Silicon nitride balls
Sized between: 100-105mm id, and 125-130mm od.
Bearings to be used in a drive shaft at a constant speed approx. 2,500rpm

Thank you for your attention to this.

Ed Carver

How much for six Ed?

$150 is a lot for shipping. Too much. I can almost go over there
for $150 :)

Henry what do you think about all this?

Paul Lamar


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.