Paul,

Did you see my post regarding vacuum leaks?  I've concluded that there
is a major vacuum leak around the point where the throttle cable passes
through the slide-throttle frame in order to actuate the slide.  Do you
have any suggestions for how to install a seal, and what type might work
best.  Here is a picture of one from McMaster that looks like it should
work, but I'm concerned about adding more friction to the assy.  I would
like to find a low friction seal.


Mark


Yes I did and I just sent an answer but I don't think that is a problem.

However you can buy small shaft Teflon lip seals.

http://advanced-emc.com/polymer-industrial-seals.php?gclid=CMG3kp7ZwK0CFQR5hwodVwOn_g


Paul Lamar