Subject: Latest one barrel Holley for slide throttle 2
From: rotaryeng
Date: 1/12/2012, 4:43 AM
To: AAAA Put this in the To box


   Here are some of the latest 3D's showing how the float
   bowl moves up and down a half inch to lean the mixture.

   The scale on this DWG is more accurate as I found
   my Holley 4 barrel to measure.

   BTW if you apply dynamic pressure to the float bowl
   the delivered mixture will be a function of both vacuum
   in the venturi throat plus the square law dynamic pressure
   In other words the dynamic pressure in the
   intake runners will be the square of the air velocity.
   At full chat that can be as high as 300 MPH.
   Sort of a mini pito tube in the intake runner.

   I am not sure this is what you want but it can always
   be leaned and the bottom line is: the fuel will squirt
   out into the intake runner better.

   I learned this trick from Ellison.

   The more I work on this the better it looks.

   You will be up and running in 5 minutes not
   one year tuning an EFI in the air.

   There are only four cheap parts to make.
   The rest of the needed parts are stock Holley.
   One can buy a brand new 4 barrel Holley for $250 to scavenge
   the parts from. Perhaps someone can find some on ebay.

   Paul Lamar


   Here is a more compact version that will fit under most
   cowls.


   Paul Lamar

 Paul,

 The 2 float bowls could be mounted to a single metering plate cross
 drilled with 2 separate outlets.  Then only one unit would have to be
 raised and lowered.  Would this require flex tubing from the bowl
 outlets to the venturi tubes?  We would have to turn a venturi into 2 2
 inch OD tubes?  Just thinking.

 Joe Berki

 It does require flex tubing. Each float bowl needs to be close
 to the jet. Sketch up what you have in mind.

 Here are some dwgs for the Marvel Schribler HA-6


 Paul Lamar


Paul,
Here is a sketch, I am not sure if there are any other connections to the system.  Please elaborate.

Joe Berki
Limo EZ

Nice sketch Joe but you must draw things to scale. Won't fit. The float bowl is too long. It must go between the tubes to get the float level high enough. That is why a 3D program like Rhino is worth its weight in gold.

Paul Lamar