Subject: trim
From: rotaryeng
Date: 1/17/2012, 3:13 AM
To: AAAA Put this in the To box


 Paul,

Remembering the trim situation at Reno and looking at Biz jet photos, I
noticed that the Biz jet engines that are mounted on the rear sides of
the
fuselage are tilted down at the rear. Is that optical illusion or
design to
offset pitch up at speed?

Dale Davies


I don't know the answer to that question.

Usually the thrust line goes through the CG.
Prevents pitch with sudden increase in thrust.

Paul Lamar


 Paul,
           Look at a Cessna Caravan, when looked at from the side, the
propellor angle in relation to the wing or fuse is very much angled down
so much in fact I thought one parked at Charleville QLD., had a engine
mount problem, until all the passengers climbed back on board and flew
out to Lake Eyre.
          John Burey


-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.