Subject: Name dropped on the rear engine firebird
From: rotaryeng
Date: 1/26/2012, 9:02 PM
To: AAAA Put this in the To box


http://pontiacsonline.com/Herb%20Adams.htm


Pontiacs Online: You have had an amazing career in the automotive
engineering world. I know our readers will love to hear some of your
experiences. Thank you for agreeing to this interview.

Tell us a little about your career at Pontiac. When did you start
there?

PO: There are some old photos of a rear engine early 1970's Firebird
project being driven on the street. What was your role in that
project and what became of it?


HA: There was a guy named Paul Lamar who was a kind of a genius. He
was helping Jerry Titus and that is where I met him. He said "Let's
do a rear engine car." I said "All right". And at that time Pontiac
was open to that sort of thing so I proposed it and they said "Go
ahead and do it". Paul built the car. We tested it a little bit. As
far as driving, it wasn't really a whole lot better. It improved the
weight distribution but you couldn't feel a difference driving the
car. He used a whole Toronado drive train and put a Pontiac engine
on it. The engine sat where the back seat and trunk normally would
have. We gave that car to the crash test guys. They wanted to see
what would happen in a crash with all that weight behind the driver,
but I don't think they ever actually ran the crash test.

Rear Engine Firebird


Don't tell me old Herb is finally doing email :)

Paul Lamar

Scott Harvey, a Chrysler engineer by day, built a 4 wheel drive Dodge
Aspen Pro Rally car, late 70s - early 80s, I forget exactly. I seem
to recall that he used Toronado parts to get drive to the front
wheels and a Mopar V-8 for power and a Torqueflite automatic
transmission. Can't recall what he used for a transfer case. The
funniest part was his first time in scrutineering ..... there was no
parking/emergency brake, just the PARK position in the automatic
trans. They really gave him a rough time about that!

Scott later went on to running the Shelby- GLH operation in CA in
the 80s.

Then Rod Millen did the same sort of thing with an RX-7 to make a 4WD
rally car.  I think he used parts from the FWD Mazda GLC to get
driven front wheels. Having a rotary engine, it was really LOUD! Too
bad Mazda never got on the 4WD kick for the Rx-7/8. It would have
made a worthy contender for the Porsche Turbos with 4WD

Lots of other interesting cars have been seen in stage rallying, some
private and some manufacture efforts..... particularly after the Audi
Quattro appeared on the scene and made 2WD obselete. But the FIA
outlawed Group B in rallying in the later 80s because the cars just
got too fast! Henri Toivonnen is reputed to have taken a Group B
Lancia Delta rally car (yeah, a small sedan with windows and roof and
seating for 2) around one of the Spanish GP tracks in a time that
would have gotten him 4th or 5th on the grid for the F-1 race! It was
also mooted that a Sport Quattro could do 0-60 MPH in under 3 seconds
.... on DIRT!

Too bad Detroit never got interested in rallying!  Gene Henderson did
some interesting stuff, first with a Waggoneer in the 70s and then
with and AMC Eagle in the 80s.

SD


Detroit (Jeep) did get seriously interested in rallying.  But they
called it Baja.
jd


-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.