Subject: Integral prop shaft and planet carrier
From: rotaryeng
Date: 1/30/2012, 10:22 PM
To: AAAA Put this in the To box




   This looks real simple. It might be easier than I first thought.
   Getting the roll pins out with Jean's bigger hammer goes a long way
   towards making this viable.

   Paul Lamar


   Here is the cut a way.


   Paul Lamar



Hi Paul!

I'm ready to cut the integral planet/prop shaft to length and do some
machining. Some of your rhino images show the planet end set inside the
housing about 2 inches. How far should it be set into the shaft? And how
far should it extend beyond the prop end of the tube housing? For my
Cozy4 I can have the prop flange be 12.5" behind the bell. I have a 12"
long housing tube.
Thanks!
Ed Carver


Hang on Let me send you some dwgs with dimensions.

Did you find and input shaft you want to use?

Paul Lamar

-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.