Greetings all,

What has the experience with PP ing the  Renesis intake?

Is there as significant an increase as with the 13B or  is this somewhat
restricted because of the exhaust -through the plates  configuration.

Is there somebody that does these conversions? (we would  provide the
trochoids)

thanks

Rich


I was surprised  we got 250 HP on the dyno. The side exhaust ports do not
seem to
effect it  that much at 7500 RPM. Unlike the intake there is a much larger
pressure
difference across the ports. Also the RX8 side exhaust ports are  about 20%
larger in
area. Mazdatrix is running a supercharged  engine  with both side and
peripheral
exhaust ports. It sounds quite different  :)


Go on to the web site below and scroll down to near the bottom  on the
front page.
Jeff can set you up.

Paul Lamar


thanks Paul

Rich



-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.