Subject: Paul, is this your "Turbo-Compound" enabler ???
From: rotaryeng
Date: 4/29/2012, 11:44 AM
To: AAAA Put this in the To box


Paul,

Go here...

http://www.greencarcongress.com/2012/04/fallbrook-technologies-inc-developing-variable-speed-supercharger-drive-using-its-cvp-technology.html



The Input shaft is from your Turbo and then the power back to Input by the Propeller.

With this drive could you not also vary the torque back into the eventual propeller?

Bearings within the NuVinci might need to be upgraded ( Tungsten-DiSulfide coated
Ceramic?)  given the RPM's involved or do you add a gearbox to step it down between
the turbo ?

If I am way off in this tell me where, but we are talking almost off the shelf
components here...

A penny for your thoughts.

My best,
Anthony J. Liberatore

p.s. if ya go for the patent, put my name on it :-)...

McCulloch/NOVI/Paxton built the first back in 1939.
When you have a web site run by a bunch of water melons technical ignoramuses, like
Green Car, any company sending out  a press release claiming something new.... it
will get published.

Those that fail to learn from history are doomed to repeat it.


Paul Lamar
-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.