Subject: fuel rail and the RX 8 injectors
From: rotaryeng
Date: 6/4/2012, 8:59 PM
To: AAAA Put this in the To box



 Paul,

 I am trying to make the fuel rail and the RX 8 injectors work.
 I have attaché a sketch with fuel rail A and fuel rail B.
 I am using B and want to know what the lower cup style O ring is supposed to do?
 Rail A, and I do not know what the RX 8 uses, might provide a backup with the second
lower cup style O ring.
 I drilled the AN6 style rail to 27/64ths and countersunk the end to funnel the O
ring into the bore.
 Looking on the internet, the car guys use vasoline to get the rings to move into the
bore.
 I do not feel confident in the seal design.

 Appreciate any input.


 Joe Berki
 Limo EZ
 13b P Port

You only need the one upper O-ring.
Take the O-ring clip off.
Don't forget to connect the fuel rail to the intake manifold so the fuel pressure
does not blow it off.

Paul Lamar
-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.