Subject: First Flight - Turbo Rotary Velocity N17010
From: rotaryeng
Date: 6/12/2012, 12:33 PM
To: AAAA Put this in the To box


It's an achievement just to complete a plane, and another to fly it. I
commend any pilot that builds a plane and is confident enough to fly it the
first flight himself. I remember my second flight in my Viking. My 5000
hour cfi almost crashed my plane on landing because he wouldn't listen when
I told him how the other 400 people that fly the [Ly]comings recommend landing
the plane.

The general consensus would be to let a more experienced pilot fly the new
plane. I would disagree with this decision.

In my case, when my plane nears completion, I will try to find a plane very
similar to mine in size, weight, and if possible the same airfoil. After
flying this plane, I will fly mine. I know every system, every bolt, every
little thing that is in the plane. If something goes wrong, I am the best
person to know what might be wrong.

I will try to select the best day for the test, but living in South Florida
a cool day is unlikely. If I take off from KTMB, I will be under KNOW class
b airspace, and will be restricted to 1200 feet AGL. I will control what I
can, and fly the plane.

Again, congratulations for the successful flight. You apparently built a
good plane, and managed the risks.

Kevin Alderman


-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.