Subject: First Flight - Turbo Rotary Velocity N17010
From: rotaryeng
Date: 6/13/2012, 4:04 AM
To: AAAA Put this in the To box


 It's an achievement just to complete a plane, and another to fly it. I
 commend any pilot that builds a plane and is confident enough to fly it the
 first flight himself. I remember my second flight in my Viking. My 5000
 hour cfi almost crashed my plane on landing because he wouldn't listen when
 I told him how the other 400 people that fly the [Ly]comings recommend landing
 the plane.

 The general consensus would be to let a more experienced pilot fly the new
 plane. I would disagree with this decision.

 In my case, when my plane nears completion, I will try to find a plane very
 similar to mine in size, weight, and if possible the same airfoil. After
 flying this plane, I will fly mine. I know every system, every bolt, every
 little thing that is in the plane. If something goes wrong, I am the best
 person to know what might be wrong.

 I will try to select the best day for the test, but living in South Florida
 a cool day is unlikely. If I take off from KTMB, I will be under KNOW class
 b airspace, and will be restricted to 1200 feet AGL. I will control what I
 can, and fly the plane.

 Again, congratulations for the successful flight. You apparently built a
 good plane, and managed the risks.

 Kevin Alderman

Thanks Kevin

Chris Barber

-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.