Bouncing around what to do about monitoring my single rotor, on the ground and in
flight, I looked at a zillion of possibilities. Non met my requirements of being
simple and affordable and still doing the job. I even went so far as building a timer
for my small camera taking a picture every few seconds. I never finished it.
Now I discovered GoPro, and suddenly my problems were solved.
The first picture is what the camera is taking, and the second is zoomed in to
whatever I want to look at.
The camera is clipped to my front harness taking pictures at the rate I set it to.
I think every first flight should have it so the pilot does not have to worry about
not reading engine data, and can safely fly the airplane.

Go to GoPro.com for spec.

Richard Sohn
N2071U

http://www.fairpoint.net/~res12/home.html

-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.