I went out on a cross country from Everett, Washington to Walla Walla and back the
last few days. Cruising at WOT at 11, 500 feet I had a MAP of 19-20 and was making
about 140 mph true rpm was around 6200 with a catto 3 blade 74 x 88 pitch. I need
some aerodynamic cleanup on my cooling scoop, something I intend to work on this
winter. But I think that I'm probably only making about 150 hp or so- not bad, but
not what I could make. I think that the NA 13BREW with four ports and 9.1/1
compression would not be a match for a 13 b with p ports and 9.7/1 compression. I'm
thinking that I might be building such and engine for an engine swap in the future.

Oh, and by the way, it was a great day for flying.

Brian Trubee

Build another engine with a p-port Brian. It will really help up high.
A 4 port will never match a p-port. A good 4 port manifold is hard to make as well.
I assume you have a 2.17:1 gear box.

Paul Lamar

I don't know if I would get an appreciable increase in power if I were to use
premium, I am using regular mogas at the moment.

Brian Trubee

BTW power in a rotary is directly related to RPM in that range.

The best pay off is work on the cooling drag first.

Pressure on any surface facing forward is drag. Use a water manometer.
Get a Gopro camera to record the results.

Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.