Hello,
  I am looking for a rotary engine school, college or course I  can attend.
 I
  am located
  in Virginia, US but will go to  where I need to go. Thanks.

  Edgardo

  There are no  schools that I know of.

  Read the everything on the  web  site below and then ask questions on
 here.

  Will will be glad to  give you an education.

  Paul Lamar

  Hi, i'm driving  from Montreal to Florida tomorrow through sunday to work
  on
  my  aircraft for a few weeks, as a thought is there anyone more or less
  along the way with a rotary aircraft project that doesn't mind showing  it
  off briefly, maybe answer a few questions i might think of. I  know its
  friday tomorrow so most are working, just on the off  chance,

  Alex


  Alex,

  I'm in  Manchester, CT not too far off I-91 just east of Hartford. (I-91
 to
  I-291
  to I-384 exit 2(about 8-10 minutes)). I will be doing some  riveting on my
  RV-9A
  this weekend. Send me your email  address and cell # to (wmjack at
  t3cs.net
  )
  and
  we can work something out.

  Regards,

  Jack Hilditch

  Edgardo,
  Some of us on here learned  early on in the RX2 days, and the only school
  was
  the  "School of Hard Knocks". We broke everything except an eccentric
  shaft
  learning how to make reliable hp out of these. It's a good  thing parts
  back
  then were really cheap!
  The guys on  this forum are some of the best out there in the rotary world
  for  aircraft applications. Some of us are opinionated, but the technical
  value of what Paul has on his site is beyond valuable to the new  rotary
  fan.
  Have fun!
  Larry

  Thanks Kevin  & Jack,

  Jack i sent you a mail, Kevin i am up between Williston and  Daytona, will
  see what i can do to drive down to the keys on a  weekend

  Alex

  While you are that far north in Florida, I would  stop in and see Tracy in
  Bell. Worth the trip I promise.

  Kevin  Alderman

  I don't think the Tracy is in Bell anymore.
  Peter

  As of today (Friday 6/29/12), Tracy Crook's website lists Bell, FL as the
  home base.

  rotorinterest

  Rotor Head

 Kevin thanks, i'll get my US phone recharged today so we can chat and
 make the arrangements. I was also planning to drop in and visit Tracy as
 its close to my build, i wanted to visit a few  aircraft and
 installations to get some points of view on the rotary,auto installations,
 what works and not etc. I have a soob EJ22 with belt drive and T3 bolted to
 engine mount that came with my kit

 Alex


Any time, glad to help. I have been to Tracy's and he was good enough to
spend a whole day with me. Since then, I email and ask him questions, so
that when I get ready to bolt on the psru and ecu I won't have to change
anything. Much.

Kevin Alderman.
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.