I will soon be at a point to need a PSRU- if anyone knows of a used one or
  has one not being used, let me know. Tracy said a new one is about 3 or so
  months out, and he wont get started on it til he gets back. I'm not in
  dire
  need, just looking ahead.

  On Tracys ECM- what is the verdict at this point- While I hope to be able
  to build our own, Tracy's unit apparently is functional and available.
  Is there anyone here that likes or dislikes his unit, and why.
  Are there alternatives that are better for a turbo p port 13 b?

  Its wiring time, and I hate to work under the panel if I dont have to. I
  am
  trying to pre wire as much as I can before I start installing anything
  else
  on the interior or exterior of the firewall.

  Kevin Alderman


 Kevin, contact me off line, I have a RWS 2.85:1 and a controller, both new
 and unused.

 jorogi at shaw dot ca

 John

 Kevin, if your interested in this one up in Canada and its in the east
 close to where
 I live I can bring it down with me the next time I drive down to Florida
 Alex

 -What kind is it and what is the ratio?

 Paul Lamar


Alex,
Based on what Paul and Tracy have told me, I am planning to use the 2.85:1.
 What is the ratio and what type of unit, then lastly how much do they want
for the unit. If you would prefer to go private, my email is alderman.kevin
at gmail dot com and my phone is 239-896-7576.

Thanks for the megasquirt info for those that sent it. At times it seems
that the plane wont ever be completed, but then when you sit back and
actually think about it, its so close and yet far away at the same time.
With any luck, and an economic upturn, I might be done in a year!

Kevin Alderman

Wise choice Kevin. Power in a rotary is directly related to RPM.
Up to 11,000 RPM. The real red line :)

Paul Lamar
-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.