This looks like a nice all alloy motor, made in Oz. The side plates are
$2280 Ozzie dollars.
Cheers Chris in NZ
http://www.billetinc.com.au/#
<http://www.hotfrog.com.au/Companies/BILLET
http://www.hotfrog.com.au/companies/BILLET/images/BILLET_64173_image.JPG
------------------------------------------------------
What does it weigh?
Why the custom rotor housing?
What does the end housing coolant passages look like?
Has it run? At what power level and for how long?
Paul Lamar
The rotor housings may be a stock part with a trim from machining.
Just for cosmetics?
Robert
Let us know how you go Neil. I'm 3hrs from there and I 'm keen to
check that out. I will definately be having a look at that and have
an uncle that I'll be dragging along, he lives in Chermside Nth
Brisbane and is a retired L.A.M.E. looks really good. BTW I found
this new product at http://xtremerotaries.co/service-pages/semi-
peripheral-port.htm might be interesting, worth a look. What do you
think Paul?
Graeme Riley
That is the expensive way to do it. We had a lot of trouble with
bonded in leaking. The tig welded in is a lot more reliable. These
guys are heavy into drag racing. A bit overkill for aircraft.
Paul Lamar
Graeme,
Sadly it seems that Rohan anbrose AKA xtreme rotaries
is now scaling down his business for whatever reason which is a
pity. Brilliant mechanic on rotaries. He actually did my P porting
and set up my motor, but only now apparently works one day a week
for himself. Neil.
Yeah Neil, I saw that he was available only by appointment and that
he was sufffering under the high Aussie dollar. I agree it is a
shame as his products turn up on international sites and are well
reguarded, he obviously has design and machining ability. I do hope things
improve for his business, if he can hang in there things hopefully
will turn around.
Where are you Neil? got any specs on your engine you'd like to
share. Thanks Graeme
Graeme,
Thoroughly worth a visit to Darren. He is
currently working on a 600HP 3 rotor for some Lancair or whatever.
Never even asked what PSRU he was to use. Today he has a bloke
coming to see about a single rotor. I think he will be very busy. I
am in central NSW. Just google Parkes in NSW, then radio telescope,
go a mile NW of there and you have my strip, then another mile to
the west again and you have my house, the one with the pool. I
won;t be in it for a month or two, so it will be OK!! Neil.
Do you guys have Detroit Diesel DD15 or Daimler engines in Oz?
Darren might adapt the DD15 turbo compound system to that 600 HP 3
rotor for lower fuel burn. If Darren does it I will visit.
Here is a guy in Perth that almost did it but the supercharger
exploded around 1400 HP before he got it installed. He was going to
adapt a CW R-3350 TC blow down turbine.
Paul Lamar
The air flow for 600HP may dictate the DD16 components.
Dale Davies
--
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.