This looks like a nice all alloy motor, made in Oz. The side plates are
$2280 Ozzie dollars.
Cheers Chris in NZ
http://www.billetinc.com.au/#
<http://www.hotfrog.com.au/Companies/BILLET
http://www.hotfrog.com.au/companies/BILLET/images/BILLET_64173_image.JPG
------------------------------------------------------
What does it weigh?
Why the custom rotor housing?
What does the end housing coolant passages look like?
Has it run? At what power level and for how long?
Paul Lamar
The rotor housings may be a stock part with a trim from machining. Just for
cosmetics?
Robert
Let us know how you go Neil. I'm 3hrs from there and I 'm keen to check that
out.
I will definately be having a look at that and have an uncle that
I'll be dragging along,
he lives in Chermside Nth Brisbane and is a retired L.A.M.E. looks really
good.
BTW I found this new product at
http://xtremerotaries.co/service-pages/semi-peripheral-port.htm
might be interesting, worth a look. What do you think Paul?
Graeme Riley
That is the expensive way to do it. We had a lot of trouble with bonded in
leaking.
The tig welded in is a lot more reliable. These guys are heavy into drag
racing. A
bit overkill for aircraft.
Paul Lamar
Graeme,
Sadly it seems that Rohan anbrose AKA xtreme rotaries is now
scaling down his business for whatever reason which is a pity. Brilliant
mechanic on rotaries. He actually did my P porting and set up my motor, but
only now apparently works one day a week for himself. Neil.
Yeah Neil, I saw that he was available only by appointment and that he was
sufffering
under the high Aussie dollar. I agree it is a shame as his products turn up
on
international
sites and are well reguarded, he obviously has design and machining ability.
I do
hope things
improve for his business, if he can hang in there things hopefully will turn
around.
Where are you Neil? got any specs on your engine you'd like to share. Thanks
Graeme
Graeme,
Thoroughly worth a visit to Darren. He is currently
working on a 600HP 3 rotor for some Lancair or whatever. Never even asked
what PSRU he was to use. Today he has a bloke coming to see about a single
rotor. I think he will be very busy. I am in central NSW. Just google
Parkes in NSW, then radio telescope, go a mile NW of there and you have my
strip, then another mile to the west again and you have my house, the one
with the pool. I won;t be in it for a month or two, so it will be OK!!
Neil.
Do you guys have Detriot Diesel DD15 or Daimler engines in Oz?
Darren might adapt the DD15 turbo compound system to that 600 HP 3 rotor
for lower
fuel burn. If Darren does it I will visit.
Here is a guy in Perth that almost did it but the supercharger exploded
around 1400
HP before he got it installed. He was going to adapt a CW R-3350 TC blow
down turbine.
Paul Lamar
Lost all contact with Detroit after they went to 4 stroke.
Went to Cummings and now Cat, so unable to help off the top of my head.
Cannot recall seeing any Daimler, or are you referring to Mercedes Benz of
which there are many. Apparently the blokem that wants 600 hp wants to race
it, so fuel burn will be a non event, just so long as it GOES!
Neil.
In theory turbo compound rotary the most efficient internal combustion
engine of all
time. It would make an excellent generator.
Daimler, Detroit, MB all the same international company now. See if there
are any 600
HP road train diesels out there with turbo compound. I saw a lot of road
trains in
2002 in the out back around Mount Isa.
BTW what does your intake manifold look like. Got any pictures looking down
from a
step ladder?
Paul Lamar
Paul,
Oddly enough I don't have a photo from on top. The two runners go
into the blue plenum box (moulded in two halves from an ice cream container
possibly 6 inches square) at 17 inches each and the intake goes from there
to an air filter on top of the air intake for the heat exchangers. Space
over the top of the motor was very scarce as the thrust line of the motor is
high in the glastar.
There are road trains all around here, so should be no trouble to find
something with a turbo compound, although I have never heard of one. Will
enquire. Road trains in NSW are restricted to a double trailer, whereas in
Qld they can get up to 3 trailers, and the territory runs 4 trailers. Way
back in the 60's they had a competition at Bourke to see just how many
trailers one tug could pull. I have a photo of it somewhere, but it was
about 90 plus trailers. Then the WA boys got wind of it and took the record
with something like 105 trailers. Not to be outdone the Qld blokes retook
the record with from memory 112 trailers set at Clifton in southern Qld.
The tug was a Mack truck. It had to pull the trailers a few hundred yards.
They reckon that the steer tyres never touched the road the whole time
varying from just off the road to 2 feet off the road. I don't know who
currently holds the record. I suspect that it won't be the WA boys for all
their dollies are now triples whereas the eastern states still only have
the bogies, so, much less rolling resistance for a competition of this
nature. As usual transport is held back by "experts" who have a uni degree
and have never driven anything bigger than a push bike and just don't get
the situation here in the "Back country". All this means that trucks are
now running with up to 1200 hp. Most of these are auto g/boxes for clutches
simply can't take the power. In here on the inter state highways they are
all around the 600 hp dragging b-doubles. Neil.
--
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.