Subject: Turbo 13b (2nd gen) in my Velo
From: rotaryeng
Date: 7/10/2012, 10:42 AM
To: AAAA Put this in the To box


 Some pictures of my install I my Velocity SE. First flight was a month ago.

 Yep, that is a big ol' draggy (and ugly) scoop hanging off the lower cowl,
 but it
 sure improved cooling. As testing progresses I hope to make it smaller,
 prettier,
 more aerodynamic and hopefully with much less drag. But, hey, did I mention
 I flew
 the thing ;-)

 Chris Barber
 Houston

Chris,

If the line feeding the redrive is a hardline, you may want to
consider either bracing it so it can't vibrate or replacing it with
braided SS, or both.  It is not a matter of IF, but WHEN it will
break.

Congrats on your lift-off.  I'll have to fly down to Houston and see
you one of these days.  Or, you're always welcome at Lockhart (50R).
Any chance of you making Charlie's fly-in this Sept?

Mark S.

Mark,

Funny you mention that as I had thought the same thing.  That particular piece was
fabricated/installed by a buddy who was lending a hand way back when. Changing it out
had occurred to me but since it was working and for a long time so much was proof of
concept I have yet to do so....however, with your comment, I will be prompted to have
it done, likely in the next few days while rain is keeping me grounded.

I finally posted as I assumed I would get some feedback....it is welcome....thanks

Chris


The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.