Subject: Turbo 13b (2nd gen) in my Velo
From: rotaryeng
Date: 7/10/2012, 11:22 AM
To: AAAA Put this in the To box


  Some pictures of my install I my Velocity SE. First flight was a month
 ago.

  Yep, that is a big ol' draggy (and ugly) scoop hanging off the lower cowl,
  but it
  sure improved cooling. As testing progresses I hope to make it smaller,
  prettier,
  more aerodynamic and hopefully with much less drag. But, hey, did I
 mention
  I flew
  the thing ;-)

  Chris Barber
  Houston

 Chris,

 If the line feeding the redrive is a hardline, you may want to
 consider either bracing it so it can't vibrate or replacing it with
 braided SS, or both.  It is not a matter of IF, but WHEN it will
 break.

 Congrats on your lift-off.  I'll have to fly down to Houston and see
 you one of these days.  Or, you're always welcome at Lockhart (50R).
 Any chance of you making Charlie's fly-in this Sept?

 Mark S.

 Mark,

 Funny you mention that as I had thought the same thing.  That particular
 piece was
 fabricated/installed by a buddy who was lending a hand way back when.
 Changing it out
 had occurred to me but since it was working and for a long time so much was
 proof of
 concept I have yet to do so....however, with your comment, I will be
 prompted to have
 it done, likely in the next few days while rain is keeping me grounded.

 I finally posted as I assumed I would get some feedback....it is
 welcome....thanks

 Chris

Chris,

One other thing we have learned is to use steel fittings FWF,
especially the small dash 4 AN size.

Since you're flying a pusher, do you refer to the engine side of your
a/c as FWR (firewall rearward)?

Mark S


-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.