Subject: Turbo 13b (2nd gen) in my Velo
From: rotaryeng
Date: 7/11/2012, 12:01 AM
To: AAAA Put this in the To box


 Some pictures of my install I my Velocity SE. First flight was a month
   ago.

    Yep, that is a big ol' draggy (and ugly) scoop hanging off the
 lower cowl,   but it   sure improved cooling. As testing progresses
 I hope to make it smaller,   prettier,   more aerodynamic and
 hopefully with much less drag. But, hey, did I  mention   I flew
 the thing ;-)

    Chris Barber
    Houston

   Chris,

   If the line feeding the redrive is a hardline, you may want to
   consider either bracing it so it can't vibrate or replacing it with
   braided SS, or both.  It is not a matter of IF, but WHEN it will
   break.

   Congrats on your lift-off.  I'll have to fly down to Houston and
 see  you one of these days.  Or, you're always welcome at Lockhart
 (50R).  Any chance of you making Charlie's fly-in this Sept?

   Mark S.

   Mark,

   Funny you mention that as I had thought the same thing.  That particular
   piece was
   fabricated/installed by a buddy who was lending a hand way back when.
   Changing it out
   had occurred to me but since it was working and for a long time so
 much was  proof of  concept I have yet to do so....however, with
 your comment, I will be  prompted to have  it done, likely in the
 next few days while rain is keeping me grounded.

   I finally posted as I assumed I would get some feedback....it is
   welcome....thanks

   Chris

  Chris,

  One other thing we have learned is to use steel fittings FWF,
  especially the small dash 4 AN size.

  Since you're flying a pusher, do you refer to the engine side of
 your a/c as FWR (firewall rearward)?

  Mark S

 Could universally refer to it as the "hot side" of the firewall..

 Matt-

 Better not be TOO hot:-)).

Dale Davies

-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.