Subject: nice all alloy motor, made in Oz
From: rotaryeng
Date: 7/11/2012, 7:02 AM
To: AAAA Put this in the To box


 This looks like a nice all alloy motor, made in Oz. The side plates are
 $2280 Ozzie dollars.

                                Cheers Chris in NZ

 http://www.billetinc.com.au/#

 <http://www.hotfrog.com.au/Companies/BILLET
 http://www.hotfrog.com.au/companies/BILLET/images/BILLET_64173_image.JPG

 ------------------------------------------------------

 What does it weigh?
 Why the custom rotor housing?
 What does the end housing coolant passages look like?

 Has it run? At what power level and for how long?

 Paul Lamar


 The rotor housings may be a stock part with a trim from machining. Just for
 cosmetics?

 Robert



 Let us know how you go Neil. I'm 3hrs from there and I 'm keen to check that
 out.
 I will definately be having a look at that and have an uncle that
 I'll be dragging along,
 he lives in Chermside Nth Brisbane and is a retired L.A.M.E. looks really
 good.
 BTW I found this new product at
 http://xtremerotaries.co/service-pages/semi-peripheral-port.htm
 might be interesting, worth a look. What do you think Paul?

 Graeme Riley


 That is the expensive way to do it. We had a lot of trouble with bonded in
 leaking.
 The tig welded in is a lot more reliable. These guys are heavy into drag
 racing. A
 bit overkill for aircraft.

 Paul Lamar

 Graeme,
               Sadly it seems that Rohan anbrose AKA xtreme rotaries is now
 scaling down his business for whatever reason which is a pity. Brilliant
 mechanic on rotaries. He actually did my P porting and set up my motor, but
 only now apparently works one day a week for himself.  Neil.

 Yeah Neil, I saw that he was available only by appointment and that he was
 sufffering
 under the high Aussie dollar. I agree it is a shame as his products turn up
 on
 international
 sites and are well reguarded, he obviously has design and machining ability.
 I do
 hope things
 improve for his business, if he can hang in there things hopefully will turn
 around.

 Where are you Neil? got any specs on your engine you'd like to share. Thanks
 Graeme



 Graeme,
                  Thoroughly worth a visit to Darren.  He is currently
 working on a 600HP 3 rotor for some Lancair or whatever.  Never even asked
 what PSRU he was to use.  Today he has a bloke coming to see about a single
 rotor. I think he will be very busy.  I am in central NSW.  Just google
 Parkes in NSW, then radio telescope, go a mile NW of there and you have my
 strip, then another mile to the west again and you have my house, the one
 with the pool.  I won;t be in it for a month or two, so it will be OK!!
 Neil.

 Do you guys have Detriot Diesel DD15 or Daimler engines in Oz?
 Darren might adapt the DD15 turbo compound system to  that 600 HP 3 rotor
 for lower
 fuel burn. If Darren does it I will visit.

 Here is a guy in Perth that almost did it but the supercharger exploded
 around 1400
 HP before he got it installed. He was going to adapt a CW R-3350 TC blow
 down turbine.

 Paul Lamar


              Lost all contact with Detroit after they went to 4 stroke.
 Went to Cummings and now Cat, so unable to help off the top of my head.
 Cannot recall seeing any Daimler, or are you referring to Mercedes Benz of
 which there are many.  Apparently the blokem that wants 600 hp wants to race
 it, so fuel burn will be a non event, just so long as it GOES!
 Neil.


 In theory turbo compound rotary the most efficient internal combustion
 engine of all
 time. It would make an excellent generator.

 Daimler, Detroit, MB all the same international company now. See if there
 are any 600
 HP road train diesels out there with turbo compound. I saw a lot of road
 trains in
 2002 in the out back around Mount Isa.

 BTW what does your intake manifold look like. Got any pictures looking down
 from a
 step ladder?

 Paul Lamar


 Paul,
           Oddly enough I don't have a photo from on top.  The two runners go
 into the blue plenum box (moulded in two halves from an ice cream container
 possibly 6 inches square)  at 17 inches each and the intake goes from there
 to an air filter on top of the air intake for the heat exchangers.  Space
 over the top of the motor was very scarce as the thrust line of the motor is
 high in the glastar.

     There are road trains all around here, so should be no trouble to find
 something with a turbo compound, although I have never heard of one.   Will
 enquire.  Road trains in NSW are restricted to a double trailer, whereas in
 Qld they can get up to 3 trailers, and the territory runs 4 trailers.  Way
 back in the 60's they had a competition at Bourke to see just how many
 trailers one tug could pull. I have a photo of it somewhere, but it was
 about 90 plus trailers.  Then the WA boys got wind of it and took the record
 with something like 105 trailers.  Not to be outdone the Qld blokes retook
 the record with from memory 112 trailers set at Clifton in southern Qld.
 The tug was a Mack truck.  It had to pull the trailers a few hundred yards.
 They reckon that the steer tyres never touched the road the whole time
 varying from just off the road to 2 feet off the road.  I don't know who
 currently holds the record.  I suspect that it won't be the WA boys for all
 their dollies are now triples whereas the eastern states still only  have
 the bogies, so, much less rolling resistance for a competition of this
 nature.  As usual transport is held back by "experts" who have a uni degree
 and have never driven anything bigger than a push bike and just don't get
 the situation here in the "Back country".  All this means that trucks are
 now running with up to 1200 hp.  Most of these are auto g/boxes for clutches
 simply can't take the power.  In here on the inter state highways they are
 all around the 600 hp dragging b-doubles.    Neil.


   Neil,
              You probably should probably explain what a "B" double is
also tandem and triple dollys because I do not think they are used
anywhere else in the world.
         I have only seen single trailers, both in the US and in Europe
with two axles at the rear of the trailer. Unlike here in OZ where we
have up to three trailers with the first trailer with three, sometimes
four axles, then followed by two more trailers with a "dolly" steerable
axle at the front with two, sometimes three axles, followed by three,
rarely four axles at the rear of the trailers, mostly all with "dual
wheels", sometimes single so-called "super single" wheels. So the
combination could have a total of 82 wheels, with a overall length of I
think of 56 metres!!!
        See link about OZ road trains
http://www.youtube.com/watch?v=3oWkkqMWFmM
        That Kenworth would probably have a 600 plus HP Detroit,
Cummins engine installed.
       Here in Western Queensland we have up to three trailer road
trains with two decks of cattle or four decks of sheep on the roads.
           John Burey.

-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.