This looks like a nice all alloy motor, made in Oz. The side plates are
$2280 Ozzie dollars.
Cheers Chris in NZ
http://www.billetinc.com.au/#
<http://www.hotfrog.com.au/Companies/BILLET
http://www.hotfrog.com.au/companies/BILLET/images/BILLET_64173_image.JPG
------------------------------------------------------
What does it weigh?
Why the custom rotor housing?
What does the end housing coolant passages look like?
Has it run? At what power level and for how long?
Paul Lamar
The rotor housings may be a stock part with a trim from machining. Just for
cosmetics?
Robert
Let us know how you go Neil. I'm 3hrs from there and I 'm keen to check that
out.
I will definately be having a look at that and have an uncle that
I'll be dragging along,
he lives in Chermside Nth Brisbane and is a retired L.A.M.E. looks really
good.
BTW I found this new product at
http://xtremerotaries.co/service-pages/semi-peripheral-port.htm
might be interesting, worth a look. What do you think Paul?
Graeme Riley
That is the expensive way to do it. We had a lot of trouble with bonded in
leaking.
The tig welded in is a lot more reliable. These guys are heavy into drag
racing. A
bit overkill for aircraft.
Paul Lamar
Graeme,
Sadly it seems that Rohan anbrose AKA xtreme rotaries is now
scaling down his business for whatever reason which is a pity. Brilliant
mechanic on rotaries. He actually did my P porting and set up my motor, but
only now apparently works one day a week for himself. Neil.
Yeah Neil, I saw that he was available only by appointment and that he was
sufffering
under the high Aussie dollar. I agree it is a shame as his products turn up
on
international
sites and are well reguarded, he obviously has design and machining ability.
I do
hope things
improve for his business, if he can hang in there things hopefully will turn
around.
Where are you Neil? got any specs on your engine you'd like to share. Thanks
Graeme
Graeme,
Thoroughly worth a visit to Darren. He is currently
working on a 600HP 3 rotor for some Lancair or whatever. Never even asked
what PSRU he was to use. Today he has a bloke coming to see about a single
rotor. I think he will be very busy. I am in central NSW. Just google
Parkes in NSW, then radio telescope, go a mile NW of there and you have my
strip, then another mile to the west again and you have my house, the one
with the pool. I won;t be in it for a month or two, so it will be OK!!
Neil.
Do you guys have Detriot Diesel DD15 or Daimler engines in Oz?
Darren might adapt the DD15 turbo compound system to that 600 HP 3 rotor
for lower
fuel burn. If Darren does it I will visit.
Here is a guy in Perth that almost did it but the supercharger exploded
around 1400
HP before he got it installed. He was going to adapt a CW R-3350 TC blow
down turbine.
Paul Lamar
Lost all contact with Detroit after they went to 4 stroke.
Went to Cummings and now Cat, so unable to help off the top of my head.
Cannot recall seeing any Daimler, or are you referring to Mercedes Benz of
which there are many. Apparently the blokem that wants 600 hp wants to race
it, so fuel burn will be a non event, just so long as it GOES!
Neil.
In theory turbo compound rotary the most efficient internal combustion
engine of all
time. It would make an excellent generator.
Daimler, Detroit, MB all the same international company now. See if there
are any 600
HP road train diesels out there with turbo compound. I saw a lot of road
trains in
2002 in the out back around Mount Isa.
BTW what does your intake manifold look like. Got any pictures looking down
from a
step ladder?
Paul Lamar
Paul,
Oddly enough I don't have a photo from on top. The two runners
go
into the blue plenum box (moulded in two halves from an ice cream container
possibly 6 inches square) at 17 inches each and the intake goes from there
to an air filter on top of the air intake for the heat exchangers. Space
over the top of the motor was very scarce as the thrust line of the motor is
high in the glastar.
There are road trains all around here, so should be no trouble to find
something with a turbo compound, although I have never heard of one. Will
enquire. Road trains in NSW are restricted to a double trailer, whereas in
Qld they can get up to 3 trailers, and the territory runs 4 trailers. Way
back in the 60's they had a competition at Bourke to see just how many
trailers one tug could pull. I have a photo of it somewhere, but it was
about 90 plus trailers. Then the WA boys got wind of it and took the record
with something like 105 trailers. Not to be outdone the Qld blokes retook
the record with from memory 112 trailers set at Clifton in southern Qld.
The tug was a Mack truck. It had to pull the trailers a few hundred yards.
They reckon that the steer tyres never touched the road the whole time
varying from just off the road to 2 feet off the road. I don't know who
currently holds the record. I suspect that it won't be the WA boys for all
their dollies are now triples whereas the eastern states still only have
the bogies, so, much less rolling resistance for a competition of this
nature. As usual transport is held back by "experts" who have a uni degree
and have never driven anything bigger than a push bike and just don't get
the situation here in the "Back country". All this means that trucks are
now running with up to 1200 hp. Most of these are auto g/boxes for clutches
simply can't take the power. In here on the inter state highways they are
all around the 600 hp dragging b-doubles. Neil.
Neil,
You probably should probably explain what a "B" double is
also tandem and triple dollys because I do not think they are used
anywhere else in the world.
I have only seen single trailers, both in the US and in Europe
with two axles at the rear of the trailer. Unlike here in OZ where we
have up to three trailers with the first trailer with three, sometimes
four axles, then followed by two more trailers with a "dolly" steerable
axle at the front with two, sometimes three axles, followed by three,
rarely four axles at the rear of the trailers, mostly all with "dual
wheels", sometimes single so-called "super single" wheels. So the
combination could have a total of 82 wheels, with a overall length of I
think of 56 metres!!!
See link about OZ road trains
http://www.youtube.com/watch?v=3oWkkqMWFmM
That Kenworth would probably have a 600 plus HP Detroit,
Cummins engine installed.
Here in Western Queensland we have up to three trailer road
trains with two decks of cattle or four decks of sheep on the roads.
John Burey.
John,
You are right, but where do you stop? There are also "pup"
trailers, super and Quod dog trailers, spread bogies, spring and air bag
suspension, all in the name of preserving what are called roads here in OZ.
The NSW Road and traffic Authority (RTA) spent 23 million on redoing 8
miles of highway north of parkes . The planning alone cost 13 million, only
to put the highway back exactly where it was!! That was 5 years ago. They
have just had to repair that part of the highway for the 10th time!
Naturally despite this debacle all staff still retain their jobs in the RTA.
A couple of times no one would argue, but 10 times?? I am talking major
restructure work each time. The favorite excuse is that it is the
"Trucks" that are destroying the roads, so more rules and regulations are
trotted out to "get" these monsters. Only trouble is that all the states
have different rules. You are legal in NSW, get to Vic. or Qld and you
become illegal. Calls to standardize the rules are all accepted, but
nothing changes. Legal heights vary. They are higher in Qld than NSW. A
QLd cattle truck came into NSW and wiped out all the cross road electrical
wires in three towns before the cops pulled him up and forbid him to move
before he cut the top 15 inches off his float so he then complied with NSW
laws.
Your video shows a good example of a three trailer train. With the ever
call for more HP the tug these days can consist of a twin steer with a
triple axle drive so that it can comply with the legislated axle weights.
Why the need for so much HP? Simply because of the rotten roads in OZ. If
we had American roads we could get away with half the hp. WE have to
contend with the unique Ozzie bulldust, not to be confused with bullshit.
Bulldust is simply powdered dirt. So fine that it acts and runs like water.
The pothole in the road can vary in size but the bulldust always flows back
into the hole so that it looks like just a smooth depression. The truck
will wallow like a boat as you charge through, and I stress "charge". The
bulldust will spray out like water and immediately flow back in once you
pass. You have to rely on the speed of the truck and the trailers still on
hard ground to push you through. Still recall a conversation I had with a
truckie in Winton. A tourist had found himself faced with his first pool of
bulldust in the road, so he did the natural thing and politely proceeded to
creep through it. That got him into the geographical centre of the pool,
where all motion forwards and reverse stopped. Naturally being quite hot
and no car air conditioners then, he had all car door fully open to try and
cool the car. Then he hears a truck approaching, SAVED!! The truck driver
can see the problem all right, and had no intention of joining the tourist
in the bog, so as usual flattened the accelerator and charged through the
bulldust just missing the bogged car. The truck driver was still laughing
as he told me how all he could see in the mirror was this enormous tidal
wave of bulldust engulf the car (with all doors open remember) and the
tourist drop like he was shot as the wave hit. Not only was he still
bogged, but he now had an inch of bulldust over everything inside and out.
Perhaps I should add a few fact as you suggest re the record attempt
with the 115 trailers. each trailer has 20 tyres, a bogie dolly and a tri
axle rear. that makes 2300 tyres. Each trailer would weigh with stock
crate possibly 15 to 20 tons which makes a grand total without the tug of
well over 2000 tons. If it was now in WA, where they have 3 axle dollies
that would add another 460 tyres. With most trailers at 40 feet long plus
10 feet for the A drag frame makes a total of 50 feet per trailer so the
total length of the 115 trailers would be about 5750 feet or 500 feet over a
mile. That is why the steer tyres hardly touched the ground. How they got
enough air up to get all the brakes off I don;t know.
B doubles and triples are the fad at the moment as Uni graduates try and
dictate to the trucking industry what is best for them. A B triple is a
prime mover (truck) that has an "A" trailer which has 3 axles at the rear as
usual, but also has another turntable at the rear of the trailer to take
another trailer behind. that second trailer also is the same as the first
"A" trailer with a turntable also at the rear to take a following trailer.
Then finally a normal trailer is added behind that, making 3 trailer all
articulated. A "B double" is a shortened version with two trailers The
theory is that this combination can be backed and is more stable than a road
train. This returns us the area of Bullshit and not bulldust.
A final word of warning, never piss off the driver of a road train, for
he only has to jerk the steering wheel slightly up front which can make the
rear trailer whip sideways and take you clean off the road like a big fly
swat.
Here endeth the lesson. Neil,
--
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.