Subject: nice all alloy motor, made in Oz
From: rotaryeng
Date: 7/11/2012, 11:54 PM
To: AAAA Put this in the To box


 This looks like a nice all alloy motor, made in Oz. The side plates
 are $2280 Ozzie dollars.

                                 Cheers Chris in NZ

  http://www.billetinc.com.au/#

  <http://www.hotfrog.com.au/Companies/BILLET
  http://www.hotfrog.com.au/companies/BILLET/images/BILLET_64173_image.JPG

  ------------------------------------------------------

  What does it weigh?
  Why the custom rotor housing?
  What does the end housing coolant passages look like?

  Has it run? At what power level and for how long?

  Paul Lamar

  The rotor housings may be a stock part with a trim from machining.
 Just for cosmetics?

  Robert

  Let us know how you go Neil. I'm 3hrs from there and I 'm keen to
 check that out. I will definately be having a look at that and have
 an uncle that I'll be dragging along, he lives in Chermside Nth
 Brisbane and is a retired L.A.M.E. looks really good. BTW I found
 this new product at http://xtremerotaries.co/service-pages/semi-
 peripheral-port.htm might be interesting, worth a look. What do you
 think Paul?

  Graeme Riley

  That is the expensive way to do it. We had a lot of trouble with
 bonded in leaking. The tig welded in is a lot more reliable. These
 guys are heavy into drag racing. A bit overkill for aircraft.

  Paul Lamar

  Graeme,
                Sadly it seems that Rohan anbrose AKA xtreme rotaries
 is now scaling down his business for whatever reason which is a
 pity. Brilliant mechanic on rotaries. He actually did my P porting
 and set up my motor, but only now apparently works one day a week
 for himself.  Neil.

  Yeah Neil, I saw that he was available only by appointment and that
 he was sufffering under the high Aussie dollar. I agree it is a
 shame as his products turn up on international sites and are well
 reguarded, he obviously has design and machining ability. I do hope things
  improve for his business, if he can hang in there things hopefully
 will turn around.

  Where are you Neil? got any specs on your engine you'd like to
 share. Thanks Graeme

  Graeme,
                   Thoroughly worth a visit to Darren.  He is
 currently working on a 600HP 3 rotor for some Lancair or whatever.
  Never even asked what PSRU he was to use.  Today he has a bloke
 coming to see about a single rotor. I think he will be very busy.  I
 am in central NSW.  Just google Parkes in NSW, then radio telescope,
 go a mile NW of there and you have my strip, then another mile to
 the west again and you have my house, the one with the pool.  I
 won;t be in it for a month or two, so it will be OK!! Neil.

  Do you guys have Detriot Diesel DD15 or Daimler engines in Oz?
  Darren might adapt the DD15 turbo compound system to  that 600 HP 3
 rotor for lower fuel burn. If Darren does it I will visit.

  Here is a guy in Perth that almost did it but the supercharger exploded
  around 1400
  HP before he got it installed. He was going to adapt a CW R-3350 TC
 blow down turbine.

  Paul Lamar

               Lost all contact with Detroit after they went to 4 stroke.
  Went to Cummings and now Cat, so unable to help off the top of my head.
  Cannot recall seeing any Daimler, or are you referring to Mercedes
 Benz of which there are many.  Apparently the blokem that wants 600
 hp wants to race it, so fuel burn will be a non event, just so long
 as it GOES! Neil.

  In theory turbo compound rotary the most efficient internal combustion
  engine of all
  time. It would make an excellent generator.

  Daimler, Detroit, MB all the same international company now. See if
 there are any 600 HP road train diesels out there with turbo
 compound. I saw a lot of road trains in 2002 in the out back around
 Mount Isa.

  BTW what does your intake manifold look like. Got any pictures
 looking down from a step ladder?

  Paul Lamar

  Paul,
            Oddly enough I don't have a photo from on top.  The two
 runners go into the blue plenum box (moulded in two halves from an
 ice cream container possibly 6 inches square)  at 17 inches each and
 the intake goes from there to an air filter on top of the air intake
 for the heat exchangers.  Space over the top of the motor was very
 scarce as the thrust line of the motor is high in the glastar.

      There are road trains all around here, so should be no trouble
 to find something with a turbo compound, although I have never heard
 of one.   Will enquire.  Road trains in NSW are restricted to a
 double trailer, whereas in Qld they can get up to 3 trailers, and
 the territory runs 4 trailers.  Way back in the 60's they had a
 competition at Bourke to see just how many trailers one tug could
 pull. I have a photo of it somewhere, but it was about 90 plus
 trailers.  Then the WA boys got wind of it and took the record with
 something like 105 trailers.  Not to be outdone the Qld blokes
 retook the record with from memory 112 trailers set at Clifton in
 southern Qld. The tug was a Mack truck.  It had to pull the trailers
 a few hundred yards. They reckon that the steer tyres never touched
 the road the whole time varying from just off the road to 2 feet off
 the road.  I don't know who currently holds the record.  I suspect
 that it won't be the WA boys for all their dollies are now triples
 whereas the eastern states still only  have the bogies, so, much
 less rolling resistance for a competition of this nature.  As usual
 transport is held back by "experts" who have a uni degree and have
 never driven anything bigger than a push bike and just don't get the
 situation here in the "Back country".  All this means that trucks
 are now running with up to 1200 hp.  Most of these are auto g/boxes
 for clutches simply can't take the power.  In here on the inter
 state highways they are all around the 600 hp dragging b-doubles.
 Neil.

    Neil,
               You probably should probably explain what a "B" double
 is also tandem and triple dollys because I do not think they are
 used anywhere else in the world.         I have only seen single
 trailers, both in the US and in Europe with two axles at the rear of
 the trailer. Unlike here in OZ where we have up to three trailers
 with the first trailer with three, sometimes four axles, then
 followed by two more trailers with a "dolly" steerable axle at the
 front with two, sometimes three axles, followed by three, rarely
 four axles at the rear of the trailers, mostly all with "dual
 wheels", sometimes single so-called "super single" wheels. So the
 combination could have a total of 82 wheels, with a overall length
 of I think of 56 metres!!!        See link about OZ road trains
http://www.youtube.com/watch?v=3oWkkqMWFmM
         That Kenworth would probably have a 600 plus HP Detroit,
 Cummins engine installed.
        Here in Western Queensland we have up to three trailer road
 trains with two decks of cattle or four decks of sheep on the roads.
            John Burey.

 In Canada as I understand it goes like this;
"A" single trailer. Tandem or tri-axle on the trailer.
"B" two trailers with a dolly under the front of the rear trailer. Tandem axle
w/dual wheels at the rear.
"Super B" two trailers w/ 5th wheel on the rear of the front trailer.
Frequently tri-axle at the rear of the front trailer.
"C" triple trailer with dollies on the front of the two rear trailers. Single
or tandem axles at the trailer rears
I have seen dollies with tandem axles, but usually single.
We do have max length limits. Saskatchewan has introduced a longer length
limit for trucks between Saskatoon and Regina only.
Tractors to about 600HP as the DD16 has and tandem or tri-axle drive. No super
single trailer applications allowed, only duals.
Single axle tractors for urban delivery with reduced weight apps.
The DD15 and DD16 only available in Freight shakers and Western Stars.

Dale Davies

Dale do you think you can find a DD15 and measure the turbo compound hardware for me?
I want to make a scale 3D drawing mounted on a 3 rotor.

Paul Lamar
-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.