Ed Carver came up with a good idea for leaning Megasquirt systems.
 It is quite simple. Lower the fuel pressure.

 It is a good idea the keep the fuel pressure regulators on the engine side
 of the
 firewall for fire reasons so mount it in such a fashion that a shaft can
 be uses to
 operate the adjusting screw from the instrument panel. Not so easy with a
 pusher.

 Paul Lamar

Attach a bellcrank to a short adjuster shaft, and then use the bowden cable
normally used for mixture control.  Not too bad for a pusher.

Be sure to have a spring on the bell crank which pulls it full rich.  In
case the cable breaks.


Matt-


-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.