I think I am running into limitations of the MC68HC908.
I think I need another timer module for the dwell calcs.
Since I am doing another board anyway I am thinking putting a
faster and better processor on it.
Not much different in cost and some of the later Megasquirt asm
programs will work. The same processor is used on the daughter card.
However there is other stuff on the daughter card we don't need. GM
stepper IAC control not needed. CANBus communications for interface
with GPIO Board, IO Extender, or other devices.
DIYautotune wants $199 for the daughter card but you still have to
pay another $250 for the mother board.
Why not? Just a few extra bucks for the processor. $10 total
roughly. You can never have enough I/O. http://tinyurl.com/755wdzh
The MC9SC64 has no ROM in it. You flash the whole program in it.
It has 64K flash and 4K RAM.
Here is a list of feature.
-----------------------------------------------------------------------------------------
----------------------------------------------------
Paul Lamar
Brain fart I guess. 22 plus 45 is not 97. Must be new math. Old math is 67*.
Dale Davies
I pasted it as plain text. Are you set to html?
Here it is a jpg.
Paul
--
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.