Subject: DD15 and DD16 Turbo compound Preliminary 3D's
From: rotaryeng
Date: 7/22/2012, 10:39 AM
To: AAAA Put this in the To box


 Do  you guys have Detroit Diesel DD15 or Daimler engines in Oz?
 Darren  might adapt the DD15 turbo compound system to  that 600 HP 3
 rotor for  lower fuel burn. If Darren does it I will visit.

 Here is a guy  in Perth that almost did it but the supercharger exploded
 around  1400
 HP before he got it installed. He was going to adapt a CW  R-3350 TC
 blow down turbine.

 Paul Lamar

 http://www.youtube.com/watch?v=9XufD9b5MH0
 Paul,
 I am  still looking into the mounting dimensions. My contact has left
 Detroit
 and has not called back. May be on holidays. Tripped over  this
 video and thought it answers part of the old engine question.   How
 is the RV4 coming along?

 Dale Davies

 Thanks  for that link Dale. I can scale what I need off these screen
 shots. I have  the engine length numbers. What is the typical
 flywheel diameter for truck  engines this size?

 I am working on adapting megasquirt to the  rotary in the RV4.

 Paul Lamar

 Pretty impressive video of  the Detroit, Dale.  I would really like
 to know what oil he used in  it.  I wonder if it was Schaeffer
 Synthetic?  That's what I  use.  It has moly in it as well.  Also,
 like to know what  gasket sealer Detroit uses to build that engine.

 Van

 Those  engines were designed for a B50 life expectancy of 1.2 million
 miles.

 http://ezinearticles.com/?What-Exactly-Does-B50-Life-Mean?&id=6973238

 Detroit  uses an anaerobic sealant for many of the sealing requirements.
 These
 include the flywheel housing/timing cover, that oval cover on the  back of
 the
 head and some oil pans. It needs an absence of air to harden  thus cast
 aluminum covers work better than stamped tin.
 To find out the  oil used you would need to contact the fleet owners or
 their
 maintenance  super. Any of the new higher quality oils should produce
 similar
 results.  Modern oils, filters and metallurgy are far superior to a few
 years  ago.
 These engines are impressive! One guy I had the opportunity to speak  with
 related that all other things equal; HP, load, etc., he got 300Km more  out
 of
 a fill than the other fleet trucks with Cat or Cummins which go up  to
 1000Km's. That is 30% farther on the same amount of fuel and these  engines
 have exhaust valves. They are DOHC with 4 valves per  cylinder.
 They are available in Australia.

 Dale Davies

 DD is  not claiming that much :) Only 5%. It is true the rotary can do much
  better because there are no exhaust valves to waste kinetic energy and heat
 energy.

 Paul Lamar

 Paul --

 I have often mused about running a turbocompound-type arrangement on a race
  car but, instead of driving the output of the turbine into the engine
 crankshaft, put it into the output end of the transmission and send it straight
  to the drive wheels. With a typical mid-engine car you could mount one
 each on  each output side of the gearbox, and then take the half shafts from
 there.   The engine would be normally-aspirated and thus you could try and make
 a  case that it should be allowed the higher displacement limits of being
 unblown.  (Probably a tough case to make.)  With the slick clutch mechanism
 of the DD  system (I looked up on the DD website and that is, indeed, a nice
 job of  engineering, it seems to me) it should be only a matter of some
 development  to get all the gearing and so forth sorted out -- recognizing, of
 course, that  the development costs plenty of bucks. I figured it would work
 best at someplace  that doesn't have big speed differentials from straights
 to corners --  as on medium to high-speed ovals, for example. Might take
 some more  sorting to make it work on a road course and, also, the extra weight
 might not  help.

 And if you didn't make the thing unhook on decel it could be a real
 adventure on corner entry, especially for hard braking into very slow  corners.

 I figure the sanctioning bodies would need about 17 seconds  before
 outlawing it and telling you to get it back on the trailer and the  hell out of
 there.  It would end up as a couple of pages in a coffee-table  book about
 interesting but ultimately outlawed race cars, right after the  Chaparral and
 Brabham fan cars but before the "two-chassis" Lotus that Chapman  once brought
 to the Long Beach F1 race.

 But that DD setup looks like a very nice piece of work and the people who
 did it are to be commended.

 On the other hand, what the hell do I know?  I'm just a worn-out  throttle
 jock.

 Best always --

 Fuller

 I spent some time and money in Oxford England at the World Motor Sport Symposium
 trying to convince the F1 team engineers on turbo compound. I got some interest but
 so far no hardware. Those guys spend hundreds of millions a year on engine development.

 http://www.rotaryeng.net/Oxford-640-4802.wmv
 Save to your hard disk first. It takes a long time to stream.

 BTW the guy labeled Robin is Phd. Robin Tululia now head of Mercedes F1 technical
 team. He is related to my next door neighbor here in Ventura. Small world.
 Most all of the other chief engineers including Ferrari and Renault are Brits.
 Joe Katz is also a professor at a S.D. college.

 Paul Lamar

 Here is an scale overlay of the DD15 and a 3 rotor.
 What is amazing about the turbo 3 rotor is it will easily put out the same power.
 No replacement for RPM and gear box for torque.
 However I don't think it will last as long putting out 500 HP :)
 750,000 miles at 50 MPH is 15,000 hours :)

 Maybe with ceramic seals.

 The DD15 turbo appears to be about the right size for the 3 rotor.

 -------------------------------------------------------------
 Here are the 3D's.


 Paul Lamar

 That's impressive. BTW did the EPA 07 engine also have TC? it looked like it.
Graeme Riley

BTW Dale I still need detail dimensions on the gear box. I was guessing here.
This would make a good, 700 HP, light weight boat engine as is. A bit bulky for an
air craft engine but that could be redesigned for that specific purpose.
The combination shown is intended for testing only.

Paul Lamar
-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.