Contract/Regular full time firmware development engineer for Star12 [9S12] Freescale
microprocessor assembly language for digital communications products [embedded
systems]. Position requires development, debug, test plan development, documentation
of firmware, development and documentation of protocol, both existing and planned.
Requirement is for immediate fulfillment and is located in Boulder Colorado.
Qualifications:
Extensive experience with 9S12 assembly.
Experience with C/CodeWarrior a plus.
-------------------------------------------------------------------
I'm really missing something.
A job posting from 2009 - with no details.
Lab class listings from New Mexico Tech - Spring 2011.
HC12 is a cool processors, but there majority of the volume is used by one company.
Not wide spread
from there, so while good learning tool not a lot of call for firmware engineers
compared to some other more popular devices.
I did a lot of 8061 work, but the best thing was it lead to Power PC embedded stuff
(much more popular, and a decent resume item).
Tom Walter
.
How about the MC68HC908 Tom? What do you think of that?
Paul Lamar
Paul,
I think AVR and PIC are both very popular and easy to get. May be they
are worth looking at since assembly on them is not any more difficult
than the others?
Henry
I am sticking with the surface mount version of the MC68HC908 because all the
megasquirt software is done. Here is most of the code and a crude flow chart. Mark
Lapier has helped me out with some additional commenting.
Here is the code and where I am on the new mother board.
Paul Lamar
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.