To All (again),
 New subject: I want to use .090 " 321 SS stub-outs on my exhaust flanges,
then change to .065 " 321 SS for the rest of the exhaust tubing. A
slip-joint
will connect the two. My problem is I can't seem to find the .090 " 321 SS
with an I.D. of 2 ". I can find it with 2 1/8 " I.D. Will this work.
Frank Clementi

Good idea.
http://www.ozarktubular.com/product_stainless-steel-pipe.html
Check 2" Sched 10 pipe size. 2.375 OD 	0.109 wall.
You don't need 321 for this thick wall. 304 will do.

Ed Anderson made his RV6 rotary exhaust out of this and it doesn't even discolor :)
It could also do double duty and serve as a cantilevered engine mount :)
Hand railing.  http://www.rbwagner.com/pages/Rbwagner.html	

Paul Lamar



-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.