I am seriously considering dumping the PIC and going with the ARM.

The superior ARM interrupt handling has finally caught up with the
Superkim.
It has only taken 40 years :)

Everybody agreed the 6502 was great at handling interrupts. The
predecessor of the
ARM was the Acorn and that was patterned after the 6502.
http://en.wikipedia.org/wiki/ARM_architecture

The 6502 was used in a zillion hard disk drives back in the old days.

Interrupts are most important when it comes to controlling mechanical
devices.

I love it.

For the past month I have been investigating new processors in a highly
competitivemarket place. A very complex subject.

Paul Lamar

 My check is in the mail now.

 Zoltan


 The ARM appears to be winning. It is found in just about every cell phone and tablet
 on the market.Mikro has a BASIC for it but the manual is not yet available.
 Lots of examples of code are however.

 Paul Lamar

Sorry about the Bascom. I checked with them and they only support 8
bit AVR. So not support for it with 32 bit.

I would definitely go with your suggestion on ARM. Since it is very
readily available in the market.

Henry


-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.