Subject: Whitecourt World River Boat Races
From: rotaryeng
Date: 8/16/2012, 7:19 AM
To: AAAA Put this in the To box



  There is a couple of people from OZ and NZ in Whitecourt this weekend for
 the
 World River Boat Races. Great show! $5 to get into the river boat park. Up
 to
 140 MPH on the water. Lots of noise and water spray.

 Dale Davies

 Any rotaries?

 Paul Lamar


"Any rotaries". In case any of you didn't know, I am the director of a
non-profit ocean research group, Pelagic-Research.org. We use our boats to
take research groups to catch, tag and study sharks. I am working on the
design for a boat specifically for our work- It will be approximately 30
feet long, will have a removable transom and be powered by a pair of rotary
engines shafted to jet drives. We need the jet drives so that the sharks
and researchers can't be injured by props. We need the transom removed so
that we can pull sharks onto the deck and 3 minutes later send them back
without lifting or handling them unnecessarily.

We are collecting funding for the project, and I have a couple of hulls
picked out that can be modified for our purpose. I will post pics as the
project takes shape. I am projecting 200 HP per engine, with a pair of
engines. We are targeting next summer as the splash date.

For the question of why the rotary- here is the reasoning:

Jet drives like high speed, and run well in the 4500 to 6000 RPM range.
The engines have to fit under the deck- the rotaries are small. The whole
package has to be compact, and produce good power with reasonable fuel
economy. For comparison we used a 250 HP 2 stroke outboard running at 4500
RPM which typically burns 14 to 15 GPH. Our goal with this boat is to be
able to get 30 knots on 15 GPH or less.

We typically spend a week or more offshore on our trips, and fuel stations
are scarce at best. On top of that, I absolutely refuse to carry hundreds
of gallons of gasoline in our main vessel partly because we sleep on it,
partly because we don't have gasoline tanks on our all diesel boat. The
small boat has to be able to carry it's own fuel sufficient for the
trip. The "mother ship" uses 20 gallons per hour idling and 80 gph under
way, and takes a crew of 3 just to move it. So, we will tow the smaller
boat out, use it for the running and shark tendering, and tow it back.

For those that are counting, that will be 3 engines that I intend to use
the EFI on. I really don't like carbs on a plane, and I especially don't
like them under the deck of my boat.

I am collecting parts for engines in the boat, and any spare parts that you
have would be appreciated. We are a listed non profit in Florida, but for
some reason it seems to be taking the IRS longer to list us as tax exempt.
Go figure.

Kevin Alderman

I ran a few numbers to get an idea of the BSFC for the outboards.
14 GPH is 87.5 pounds per hour at 6.25 pounds per gallon.
If you divide that by 250 HP you get a BSFC of .35. Too low by a
factor of .6. Two cycle engines are usually .6 BSFC or higher.

My guess is you are only using 145 HP while you are getting that fuel
burn. What do you guess the throttle opening is on the outboard?

At full power on the outboard at .6 BSFC you would be burning 150 pounds
per hour or 24 gallons per hour.

I would nail things down a bit better by connecting a manifold pressure gage
to one of the outboards and record that and the RPM to see the amount
of HP you are using to go X fast.

The rotary, at partial power, leaned is .47 BSFC.

Therefor the rotary at 145 HP will burn 68 to 69 pounds per hour or 11 GPH.

At full power (250 HP) and a BSFC of .5 for the rotary 20 GPH.

At full power (200 HP) and a BSFC of .5 for the rotary 16 GPH.

Here is a HP and BSFC chart for the Le mans p-port 4 rotor.
The dotted line is leaned.

I think Dave Atkins sells a Marine water cooled exhaust manifold.

Paul Lamar
-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.