Subject: Whitecourt World River Boat Races
From: rotaryeng
Date: 8/16/2012, 9:51 PM
To: AAAA Put this in the To box


 There is a couple of people from OZ and NZ in Whitecourt this
 weekend for the World River Boat Races. Great show! $5 to get into
 the river boat park. Up to 140 MPH on the water. Lots of noise and
 water spray. Dale Davies Any rotaries? Paul Lamar "Any rotaries". In
 case any of you didn't know, I am the director of a non-profit ocean
 research group, Pelagic-Research.org. We use our boats to take
 research groups to catch, tag and study sharks. I am working on the
 design for a boat specifically for our work- It will be
 approximately 30 feet long, will have a removable transom and be
 powered by a pair of rotary engines shafted to jet drives. We need
 the jet drives so that the sharks and researchers can't be injured
 by props. We need the transom removed so that we can pull sharks
 onto the deck and 3 minutes later send them back without lifting or
 handling them unnecessarily. We are collecting funding for the
 project, and I have a couple of hulls picked out that can be
 modified for our purpose. I will post pics as the project takes
 shape. I am projecting 200 HP per engine, with a pair of engines. We
 are targeting next summer as the splash date. For the question of
 why the rotary- here is the reasoning: Jet drives like high speed,
 and run well in the 4500 to 6000 RPM range. The engines have to fit
 under the deck- the rotaries are small. The whole package has to be
 compact, and produce good power with reasonable fuel economy. For
 comparison we used a 250 HP 2 stroke outboard running at 4500 RPM
 which typically burns 14 to 15 GPH. Our goal with this boat is to be
 able to get 30 knots on 15 GPH or less. We typically spend a week or
 more offshore on our trips, and fuel stations are scarce at best. On
 top of that, I absolutely refuse to carry hundreds of gallons of
 gasoline in our main vessel partly because we sleep on it, partly
 because we don't have gasoline tanks on our all diesel boat. The
 small boat has to be able to carry it's own fuel sufficient for the
 trip. The "mother ship" uses 20 gallons per hour idling and 80 gph under
  way, and takes a crew of 3 just to move it. So, we will tow the smaller
  boat out, use it for the running and shark tendering, and tow it back.
  For those that are counting, that will be 3 engines that I intend
 to use the EFI on. I really don't like carbs on a plane, and I
 especially don't like them under the deck of my boat. I am
 collecting parts for engines in the boat, and any spare parts that
 you have would be appreciated. We are a listed non profit in Florida,
  but for some reason it seems to be taking the IRS longer to list us
 as tax exempt. Go figure. Kevin Alderman I ran a few numbers to get
 an idea of the BSFC for the outboards. 14 GPH is 87.5 pounds per
 hour at 6.25 pounds per gallon. If you divide that by 250 HP you get
 a BSFC of .35. Too low by a factor of .6. Two cycle engines are
 usually .6 BSFC or higher. My guess is you are only using 145 HP
 while you are getting that fuel burn. What do you guess the throttle
 opening is on the outboard? At full power on the outboard at .6 BSFC
 you would be burning 150 pounds per hour or 24 gallons per hour. I
 would nail things down a bit better by connecting a manifold
 pressure gage to one of the outboards and record that and the RPM to
 see the amount of HP you are using to go X fast. The rotary, at
 partial power, leaned is .47 BSFC. Therefor the rotary at 145 HP
 will burn 68 to 69 pounds per hour or 11 GPH. At full power (250 HP)
 and a BSFC of .5 for the rotary 20 GPH. At full power (200 HP) and a
 BSFC of .5 for the rotary 16 GPH. Here is a HP and BSFC chart for
 the Le mans p-port 4 rotor. The dotted line is leaned. I think Dave
 Atkins sells a Marine water cooled exhaust manifold. Paul Lamar As
 far as BSFC on the outboard, no we were not at WOT. Your guess at
 140 or  so is probably about right, cruise on plane. I ran the
 numbers because on  the way in we ran out of fuel. The owner of the
 boat said that there was no  way that we were out, but the numbers
 do not lie, and upon removing the  sending unit from the top of the
 tank the bottom of the tank was clearly  visible. Out of gas.

   We do not plan to run our research boat as a speedboat, but it is
 nice to  have power available, however a 4 rotor likely wouldn't fit
 in the space we  have available below the deck. Its primary use is
 to patrol a 2 mile radius  around the mother ship looking for and
 dealing with sharks.Since much of  our time is spent at lower
 throttle settings just easing around (2500 rpm  or so) I will likely
 go with a Renesis and leave it with standard ports and  NA.

   The water cooled exhaust is always welcome :)

   Kevin Alderman

   I am not advocating a 4 rotor. I just used that to illustrate what
 BSFC you are  likely to get. It applies to all rotaries. 1,2,3 or 4
 rotors. The RX8 engine is no  better at higher power levels. It just
 scores well at idle and low RPM.

   I thought water cooled exhaust was mandated by the Coast Guard.

   Paul Lamar

  Actually, water cooled exhaust is optional. We can always run a dry
 stack vertically if we want. Matter of fact, the Coast Guard 47'
 motor lifeboat has dry manifolds. Only wrapped with turbo insulation
 tape. The engines are Detroit Diesel 6v 92 turbo with v drives.

  Kevin Alderman

  Maybe it is just California lakes.

  Paul Lamar

 Cant speak to California, its basically another country with its own
 laws, tax structure, etc.

 Kevin Alderman

 Kevin, I should have my EFI working by the time I am out there.
 I'll bring it down and we can try it on one of your engines.
 What kind of ignition coils have you decided to use?

 Paul Lamar


 In response to the question "any rotaries", not that I am aware of. I would
like to correct that. Last I asked, they factor rotaries at 1.8 for comparison
to the piston engines. They have a 305 class for Chev 305 crate engines. The
turbines run in the Unlimited class. I plan on going down and look about. A
four rotor with the Detroit Diesel TC system on it would give the turbines a
run and more fuel efficient. Less fuel on board. A bunch of the unlimited that
run piston engines have Rehr Morrison 632 CID Chevs.

Dale Davies


-- The Rotary Engine News Letter. Powered by Linux. ACRE NL web site. http://www.rotaryeng.net You Tube key word PaulLamar2 Copyright 1998-2012 All world wide rights reserved.