Henry Nee came up with a great idea. If we standardize on a spreed sheet format for
the mixture map we can share (even across programs). Yours and mine.

This is the megasquirt format.
It is broken down into 8 RPM's and 8 manifold pressures.
Usually EFI programmers interpolate between these values.

Keven, Please do this. It will help other people greatly.

The idea is to be able to dump the table to a PC through the USB and edit it in the
PC as necessary. Then reload it back into the chip.

This is how it is done in Megasquirt.

These are median values so they can go down to zero and up to 255 as necessary.
They are also a function of the injector used. If you find that the values are all on
the high side you could go up on the injection pressure or use larger injectors.
Same vice versa.

Tracy uses two staged injectors per rotor so there could be one table for each
injector. The tables only require 65 bytes of flash memory each.

I am using one computer per rotor.

Paul Lamar

-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.