Dear paul,
 I am in malta for one and a half weeks, and a good friend of mine
 who is a rotor head and I want to build a p-port 13b rew using a
 small Turbo. We are after low quick power response as the engine
 will be fitted in a drift RX7

 Can you please send me the steps and details how to prep and cut the
 housings, and close the side ports ? Regarding the exhaust port, how
 much should in be modified.

 Do you have and simple designs for the intake manafold?  How large
 should the air box be being,?

 Thanks in advance

 Roderick

 Our p-ports are not designed for max turbo power. They are designed
 for 250 HP at 7500 RPM. You are better off with a racing beat p-port
 at 8500 or 10,000 RPM. Racing Beat has a turbo 3 rotor p-port engine
 for sale generating  333 HP per rotor. 2 X 333 equals  666 HP. That
 is what you need.

 Paul Lamar



Three rotor; 3x333 equals 1,000HP. :-)))

Dale Davies




-- 
The Rotary Engine News Letter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
You Tube key word PaulLamar2
Copyright 1998-2012 All world wide rights reserved.